Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

HJ 55 running gear on a 40?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 172
Joined: Sun Oct 26, 2003 12:46 pm
Location: Kallangur

Contact:
Contact Mechman

HJ 55 running gear on a 40?

Post by Mechman »

hi guys,
i have done a quick search and not found an answer so i thought id ask here.
i have been offered a 76 HJ55 front and rear axles with disc brake front and drum rear, with springs and shocks too. Can any one tell me if these can be bolted straight onto my 73 FJ40?

TIA

Rob
ohhhhh shite... it really didnt look that deep!
Top
Posts: 11
Joined: Tue Oct 22, 2002 6:05 pm
Location: WAMBOIN NSW

Post by ando »

Rob

should bolt straight up without any issues

rgds

Ando
Top
Posts: 1513
Joined: Tue Oct 21, 2003 8:06 pm
Location: North East Melbourne

Post by ORSM45 »

its all the same stuff but not sure about the chassis width between 55 and 40 (if there is any)
Top
Posts: 552
Joined: Mon May 26, 2003 2:47 pm
Location: across the pond

Post by beanz2 »

Yup, same width axles and spring perch to spring perch. The only real issue is the '73 FJ40 brake master cylinder is set up for drum front brakes.

Dave
Top
Posts: 172
Joined: Sun Oct 26, 2003 12:46 pm
Location: Kallangur

Contact:
Contact Mechman

Post by Mechman »

thanks guys, just what i needed to know!!
ohhhhh shite... it really didnt look that deep!
Top
Posts: 14
Joined: Sat Dec 13, 2003 12:58 pm
Location: U.S. of freakin' A.

Contact:
Contact Chef

Post by Chef »

Over here stateside, there's been much discussion as to whether there ever really was an "H" series diesel 55??? Frame width is the same here, so the swap should be a no brainer, but if you guys have hj55 pix and documentation, I'd sure like to see some!
Alan Loshbaugh
65FJ45, 276FJ40's, 83FJ60, 67KaiserM715
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 36 guests