Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Interior light issues ?

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Post Reply
Posts: 13
Joined: Thu Mar 09, 2006 5:46 pm
Location: Sydney

Interior light issues ?

Post by selaga »

Here is a weird one, my NK will not turn on the interior light when I open the drivers side front, drivers side rear, or even the cargo door either ?

Strangely when I open the drivers side front, the ignition key ring illuminates, but there is no red light on the dash either.

Passenger's side works perfect on both doors.

Checked all door switches, and all OK, any suggestions ?

Has someone got a viring diagram for a NK, LWB powerty pack ?

Thanks....
Posts: 13
Joined: Thu Mar 09, 2006 5:46 pm
Location: Sydney

Post by selaga »

Does someone have an electrical diagram for the courtesy lights circuit ?
Posts: 1130
Joined: Thu Nov 18, 2004 7:25 pm
Location: New Zealand

Post by NJV6 »

HI selaga,

I do (i think it is in my book) but can't get a look at it for 10 days so if you still need it then sing out & I should be able to help.

Glen
1994 NJ SWB, 3.5, 5 speed manual, 33's, XD9000, 4.9 diffs, Front & Rear ARB's, Safari Snorkel

2008-2009-2010-2011 Pavlova in the shed.
Posts: 13
Joined: Thu Mar 09, 2006 5:46 pm
Location: Sydney

Post by selaga »

NJV6 wrote:HI selaga,

I do (i think it is in my book) but can't get a look at it for 10 days so if you still need it then sing out & I should be able to help.

Glen
Thanks Glen,

I fixed it this morning, traced it to the multipin connector on the outer side, of the LHS toolbox storage bin, the wire pulled out of the connector, so I had to pull the thing apart and an hour later I managed to put a new connector in, and all is good now.
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests