Hi All
The GQ I bought had a stock diff lock in it. The switch was broken so I went out and bought a Navara switch to do the job. We checked which wires had power when and then wired it up to the switch accordingly. When we turn the switch to the on position the light on the dash does not light up but there is vacum pressure coming from the solenoid however the diff lock does not seem to engage. Any ideas what might be going wrong?
Cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
GQ Stock Locker problems
Had a problem with the car and it went to car heaven. I have since bought another one with the same factory locker. The vaccum hose going from the solenoid down was spit and that has been replaced. However there seems to be a problem with the switch now. It comes on when the factory switch is in the off position and turns off when the switch is in the on position. Thats my next thing to fix. Sorry I couldn't be of more help.
Who is online
Users browsing this forum: No registered users and 131 guests