hi guys
just have a Q....this morning i when't to start the old girl and it took 10-20seconds longer to start but once it was going it was like it wanted to stall but once you bring up the revs a bit it is ok untill you take your foot off the accelartor and it was like it wants to stall agen(and it seems like it was running on 5 cyclinders) ....once she is warmed up it runs ok
any way it is a 2H deisel with 358000 on the clock
Nat
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
landcruiser 2H have a cough
Moderators: toaddog, TWISTY, V8Patrol, Moderators
landcruiser 2H have a cough
Tires are like boobs, they always look big until you have played with them for a while, then you just want a bigger set
if it happened suddenly it's probably not the plugs, but the timer/relay/fuse or a wire somewhere. I think the timer and relay are one unit.
if the plugs are original they could probably do with replacing anyway
edit - It may also be at the back of the motor on no.6 plug. there is a metal bridge that comes across the manifold (i think from memory) I remember on my 60 this had corroded somewhat. I cleaned it up and put it back on but there wasn't much left of it. (still worked though) There is also a plastic bung thing that had melted.
if the plugs are original they could probably do with replacing anyway
edit - It may also be at the back of the motor on no.6 plug. there is a metal bridge that comes across the manifold (i think from memory) I remember on my 60 this had corroded somewhat. I cleaned it up and put it back on but there wasn't much left of it. (still worked though) There is also a plastic bung thing that had melted.
Who is online
Users browsing this forum: No registered users and 8 guests