Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Vitara 2.0 Snorkel
Vitara 2.0 Snorkel
The other day Airflow finally completed the snorkel for Vitara 2.0's. This snorkel will work with the 2.0 V6 and the 2.0 4cyl as well as the 2.0 Diesels in overseas markets. It runs along the guard on the outside and then turns 90 deg and goes straight in to the airbox which I felt was the better option for airflow rather than the alternative which would have taken in to the guard after it had come down the A-pillar which would have meant three 90 deg bends rather than just the one it has. Also it could have been made to hug the a-pillar a bit more closely but again it would have had some effect on the airflow so it is the best compromise given the circumstances. It's taken a while but I am very happy with the end result.
[quote="4WD Stuff"]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
now for the million dollar question..........
how much is one worth???
how much is one worth???
---------===== LOWRANGE JUNKIE =====---------
atari4x4 build up ~ MT/R 31's, calmini, body lift, j20a, 5.12 r&p + other stuff ~
http://www.outerlimits4x4.com/viewtopic ... 6&t=162392" onclick="window.open(this.href);return false;
atari4x4 build up ~ MT/R 31's, calmini, body lift, j20a, 5.12 r&p + other stuff ~
http://www.outerlimits4x4.com/viewtopic ... 6&t=162392" onclick="window.open(this.href);return false;
Atari4x4,not sure on price but I think it will be around $400 but you will need to check. I think 4wd systems in Adelaide deal in them.
Bruce, at first I wanted it to be as clean and minimal as possible and to go straight into the guard after it came down the A-pillar but that would have meant two more unnecessary 90 deg bends impacting on the airflow so in the end I figured as long as it flowed as well as it could and still hug the guard it was the better outcome. The big thing is that there was a local company willing to develop a product in ABS plastic for a vehicle that is no longer in production and provide it at a cheaper price point than the alternative fibreglass snorkel from Taiwan(?).
Bruce, at first I wanted it to be as clean and minimal as possible and to go straight into the guard after it came down the A-pillar but that would have meant two more unnecessary 90 deg bends impacting on the airflow so in the end I figured as long as it flowed as well as it could and still hug the guard it was the better outcome. The big thing is that there was a local company willing to develop a product in ABS plastic for a vehicle that is no longer in production and provide it at a cheaper price point than the alternative fibreglass snorkel from Taiwan(?).
[quote="4WD Stuff"]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
Thats great mate. As I said mate it was JMO on it. I would still go the other one. At least ya got one and that's the main thingcj wrote:Atari4x4,not sure on price but I think it will be around $400 but you will need to check. I think 4wd systems in Adelaide deal in them.
Bruce, at first I wanted it to be as clean and minimal as possible and to go straight into the guard after it came down the A-pillar but that would have meant two more unnecessary 90 deg bends impacting on the airflow so in the end I figured as long as it flowed as well as it could and still hug the guard it was the better outcome. The big thing is that there was a local company willing to develop a product in ABS plastic for a vehicle that is no longer in production and provide it at a cheaper price point than the alternative fibreglass snorkel from Taiwan(?).
Who is online
Users browsing this forum: No registered users and 0 guests