Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

isuzu 4bdi to lt95a transmision

Tech Talk for Rover owners.

Moderator: Micka

Post Reply
Posts: 12
Joined: Wed Jan 30, 2008 9:37 am
Location: paso robles california

isuzu 4bdi to lt95a transmision

Post by blue bomber »

Hello all , my names is matthew. I'm over here in amerrka..right. I was curious about using a isuzu engine in a rover .If anyone has part numbers pictures ,etc I would truly appreciate any info on the combo. I want to build an aussie style trayback. I have the cab back ,109 chassis series three bulkhead and all the necessary body work to get the "look" I'm after. I have a pair of 101 fc axles that i want to use (detroit, rear and arb front ) the cv's have been massaged by bobby long. I'm going to spring it over .......blah, blah....I also have a 1960 88 swb with a vortec 350,np435, adapted to series t/case large pin, 2.88 low range. 3.54's ARBs RD56s maxi drive shafts, aeu2522 cv's (waiting to get bobby longed) four wheel disc brakes and scout p/s. NOT boasting , just letting you know that I'm not hill billy from Amerikka.Once I figure out how to post pictures, I"ll post some of my junk. Thanks in advance. :D
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

Hi Matthew,

There is plenty of info on fitting a 4BD1(T) here:
http://www.isuzudieselswapper.com/

You could use an LT95, but you would have to source a 4BD1 bellhousing from Australia, and some 0.998:1 transfer gears, but still you will be doing more revs on the highway than if you used a gearbox with an overdrive final gear. I have a (factory) LT85 behind my 4BD1 and I am glad of the 5th gear.

If I was you I would either use an Isuzu 5 or 6 speed manual, or one of the auto boxes listed on the website above.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Posts: 176
Joined: Sat Jun 16, 2007 8:18 am
Location: New Zealand

Post by bigbad »

The .996 transfer gears were used in later 4 speed Rangies, if you need some I have a set here on the shelf. The LT95 overdrives are reasonably common on Ebay UK if you wanted to go that way. You dont say what tyre size but with 101 diffs I guess you could run 35s or larger without too much trouble.
Posts: 12
Joined: Wed Jan 30, 2008 9:37 am
Location: paso robles california

Post by blue bomber »

thanks for the link. A santana 5spd would be great. I was interested in the "a" version beceasuse the idler shaft in the t case is on timkin bearings? Am I correct?? I work for advance adapters an have access to all the tooling I can handle. The axle gearing I'm using is the original 5.57s with at least a 38" tall tire. How do you post pics?
Posts: 176
Joined: Sat Jun 16, 2007 8:18 am
Location: New Zealand

Post by bigbad »

I think you have to host them and link to them, like photobucket, then use the [Img ] [/img ] tags
Posts: 12
Joined: Wed Jan 30, 2008 9:37 am
Location: paso robles california

Post by blue bomber »

Does anyone have shots of the factory bell housing? I have acess to the engines and an lt95. The truck is primarily going to used offroad. The 88 is my run about hot rod.thanks in advance again.
Posts: 12
Joined: Wed Jan 30, 2008 9:37 am
Location: paso robles california

pic of the old girl

Post by blue bomber »

Image
[/img]
Posts: 12
Joined: Wed Jan 30, 2008 9:37 am
Location: paso robles california

more of the pile

Post by blue bomber »

Image[/img]
Posts: 764
Joined: Wed Sep 07, 2005 10:59 pm
Location: STOCKTON NSW

Post by lokka »

Looks great gota love the SWB series :D :D :D :D
Cheers

Chris

Questions $20ea Answers for said Questions $100ea
I can fix your F'ups for a fee .......
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

blue bomber wrote:thanks for the link. A santana 5spd would be great. I was interested in the "a" version beceasuse the idler shaft in the t case is on timkin bearings? Am I correct?? I work for advance adapters an have access to all the tooling I can handle. The axle gearing I'm using is the original 5.57s with at least a 38" tall tire. How do you post pics?
Nice truck.

The santana (LT85) 5-speed is great on the highway, but not as strong or low-geared as the LT95 if you are building a mainly offroad truck. That is why I reccommended the Isuzu 5 or 6 speed box or an auto. Many of the isuzu boxes have a 5:1 or 6:1 first gear, a 0.8:1 or 0.7:1 top gear, and are bombproof - and probably cheap from truck wreckers in the states (some isuzu box trucks were rebadges as GMCs over there). But if you have an LT95 you may as well use it.

I can take a pic of the LT85-Isuzu bellhousing that is in my truck, but don't know if that will be much help. I think Dougal and Bush65 have some pics of their setups, but they are running Isuzu boxes and LT230 / Atlas T-cases respectively. Someone on the Aulro forum may have pics - http://www.aulro.com/afvb/
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Posts: 12
Joined: Wed Jan 30, 2008 9:37 am
Location: paso robles california

Post by blue bomber »

thanks for your help, I'm still having difficulty finding any images and data on the "Aussie" 3.9 110. I searched both of the links and have found no significant info. If you could take a picure or two it would be appreciated. Thanks in advance. :)
Posts: 91
Joined: Sat Jan 22, 2005 4:55 pm
Location: Cairns, FNQ.

Post by 1103.9TD »

Here's mine........

[img][img]http://img1.putfile.com/thumb/4/11101485430.jpg[/img][/img][img][img]http://img2.putfile.com/thumb/1/2919400637.jpg[/img][/img][img][img]http://img2.putfile.com/thumb/5/14518594173.jpg[/img][/img]

Go to Google Australia, and do a search for Land Rover Isuzu, 4BD1, Perentie etc........
Cheers, Gerry........


7/87 110 County Isuzu 3.9TDI, Maxi Front n Rear.
Posts: 12
Joined: Wed Jan 30, 2008 9:37 am
Location: paso robles california

Post by blue bomber »

I love the 110 looks bad ass!!! :D
Posts: 91
Joined: Sat Jan 22, 2005 4:55 pm
Location: Cairns, FNQ.

Post by 1103.9TD »

Mathew, as far as I know the LT95/4BD1 belhousing is still available direct from Land Rover Australia for about $1100AUD. Reasonably cheap considering you only ever have to buy one!.
Cheers, Gerry........


7/87 110 County Isuzu 3.9TDI, Maxi Front n Rear.
Posts: 56
Joined: Mon Jan 10, 2005 8:33 am
Location: Bentleigh VIC

Post by cpmurray »

1103.9TD wrote:Mathew, as far as I know the LT95/4BD1 belhousing is still available direct from Land Rover Australia for about $1100AUD. Reasonably cheap considering you only ever have to buy one!.
It may be listed on their books, but try and order one.
Craig Murray
1951 Land Rover 80"
1984 Land Rover 90 V8 (The Yellow Peril)
Posts: 91
Joined: Sat Jan 22, 2005 4:55 pm
Location: Cairns, FNQ.

Post by 1103.9TD »

Got two a couple of months ago for me and a mate out of Brisbane, but not through Land Rover Australia, and for less than half that price for both!, so they are around!. One was marked ADF, must've been surplus!.
Cheers, Gerry........


7/87 110 County Isuzu 3.9TDI, Maxi Front n Rear.
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest