Just pulled down the donor front axle etc and got the diagram Jac Mac sent me for boring the stub axles and inserting the mt12003 toyota bushes. However my stubs are different to those in the diagram as there is a perforated looking bush inserted into the inside of the cv end of the stub already, and this is larger ID than the OD of the tojo bush.
Has anyone encountered this? I guess I'll just have to machine up either a specer sleeve or a new bush from bronze?
Cheers
Giles
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Longfields/McNamara front end question
Moderator: Micka
Longfields/McNamara front end question
When all else fails use full noise!!!
Yep the stubs u have are fron a late 80's rangie ive seen this type of stub before its got a different cv to the early rangie what year truck did the donor front axle come from and what sorta stubs do jacmac recomend ????
Cheers
Chris
Questions $20ea Answers for said Questions $100ea
I can fix your F'ups for a fee .......
Chris
Questions $20ea Answers for said Questions $100ea
I can fix your F'ups for a fee .......
donor axle
The vehice is a 1987 and the donor axle if from another 1987.
I told Jac mac this and he made no mention of suitability or not.
I have an earlier set of front hubs and stubs on another front end, will these fit the later swivel balls? If so I will just use the earlier stubs and hubs.
Cheers
Giles
I told Jac mac this and he made no mention of suitability or not.
I have an earlier set of front hubs and stubs on another front end, will these fit the later swivel balls? If so I will just use the earlier stubs and hubs.
Cheers
Giles
When all else fails use full noise!!!
Who is online
Users browsing this forum: No registered users and 0 guests