Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

35x15.5x15" Super Swamper TSL

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 183
Joined: Mon Dec 20, 2004 11:22 pm

35x15.5x15" Super Swamper TSL

Post by DIDZ »

Has anyone from the Forum ran with this size tire?? I have them in my posession & Am finally getting some 15x10" rims on Thursday to have them on the GQ.. There basically the same rolling diameter as the Simex I currently run, But they are a wide tire & was wondering if anyone has some info on pushing these through the soft stuff - ie. Sand & Mud ect..
Have spent some searching here to no avail, & Spent a bit of time searching the web, But some first hand knowledge about pressures & Such would be nice to know of? Will be on a GQ Swb 4.2 pet/gas standard ratio Auto.

Appreciate any advice :)
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

mate had 16/38.5 15's on a coilcab, ran on around 4psi beadlocked. They do suck power bein that wide. biggest issue will be gaurd clearance.
Posts: 130
Joined: Mon Jul 21, 2003 7:43 pm
Location: Gosford, NSW

Post by TOY-08V »

Hey DIDZ,
yeah mate i had these exact same tires on my V8 hilux, they were awsume for offroad traction, BUT, they suck so much more power and fuel out of ur car that it wasnt funny, i picked up about an extra 100km per tank when i went back to 35/12.5/15s. AND the cops hounded shit out of me all the time plus i found that in mud u really have to get them spinning otherwise they end up acting like suction cups, I'll never go back to them.
Posts: 183
Joined: Mon Dec 20, 2004 11:22 pm

Post by DIDZ »

Cheers for the Reply's Guy's, Fuel consumption was something I hadn't thought about as well, On Gas though So it's pretty cheap to Run. I am a tad concerned with not having the Power to Spin them, But will be taking them on there first trip this weekend so will soon see :armsup:
I got them for a great price - $250 each brand new - I was saving up for 35" ET's. But this offer was to good to refuse... Will post up my feedback on them after the weekend..

Thanks again :)
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

DIDZ wrote:I got them for a great price - $250 each brand new -
cheaper than 33inch normal mud tires.. something says his calculator is fawkt.
Posts: 1284
Joined: Tue Mar 22, 2005 12:31 pm
Location: forest lake BUILDING BOOTYFAB BARWORK

Post by frp88 »

bogged wrote:
DIDZ wrote:I got them for a great price - $250 each brand new -
cheaper than 33inch normal mud tires.. something says his calculator is fawkt.
who pays $250 for normal 33 muds I guess you dont get discounts :finger:
LETS GO BRONCOS
Posts: 183
Joined: Mon Dec 20, 2004 11:22 pm

Post by DIDZ »

nastytroll wrote:mate had 16/38.5 15's on a coilcab, ran on around 4psi beadlocked. They do suck power bein that wide. biggest issue will be gaurd clearance.
Mate, they must have looked seriously huge - the 35x15.5x15's I have are looking rediculously wide just sitting here, until I have them under the Gq I can't picture it... I have replaced my standard flares with some 6" Rubber flares, so they will sit under them...

I have 4" springs, 3 " Body & Rear qtr cut, so not to worried about guard clearence..

I'm having some doubts about pushing them :P

Soon see.

As I have posted, they were to cheap to knock back the offer of & I rang a few places around Perth & Even having to have bought some 15x10's & The cost of fitting, balancing ect.. Still under half of what the whole thing would have cost if bought from a retailer, So cna allway's try sell them if the project does not work out i spose :lol:
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests