Hi I got a mate who is wanting to make a water intercooler for his Garrett GT28 turbo. He also wants to have the water refrigerated has anyone attempted this before? Anyone know where he should look first?
Cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Water Intercoolers
Forget refrigerating it and just fit a really big radiator for it and a big fan. In drag racing they will use ice but the logistics of this for anything but drag racing makes it pretty inpractical.
If you are really keen on refrigerating then do some calculations based on the BTU's you need to take out of the intake and then work out how many hp that will give and then what size compressor is needed to pump the required amount of refrigerant. I'm pretty certain you won't go very far into working it out.
If you are really keen on refrigerating then do some calculations based on the BTU's you need to take out of the intake and then work out how many hp that will give and then what size compressor is needed to pump the required amount of refrigerant. I'm pretty certain you won't go very far into working it out.
93 Nissan Pathfinder / Terrano Turboed VH45, GQ Trans and T-case, coil overs, hydraulic winch and fair bit of other stuff. (Currently a pile of parts in the workshop)
Who is online
Users browsing this forum: No registered users and 1 guest