Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

tmax 11000lb

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 358
Joined: Mon Apr 16, 2007 10:35 pm
Location: Brisbane QLD

tmax 11000lb

Post by [gubeaut] »

can any one please help with pulling a 11000 lb tmax winch apart just having problems with the motor any diags or advice would be appreciated
4INCH EFS LIFT
SUPRERIOR ARMS
TWIN LOCKERS
11000LB tigerz11 WINCH
36 swampers OFF ROAD
3inch S/S/S exhaust
Top
Posts: 1676
Joined: Tue Oct 22, 2002 9:26 am
Location: brisbane

Post by 1MadEngineer »

what part do you need to pull apart??
the motor is held on by the 2 bolt that run through the end cap to the frame side plate.
WWW.TEAMDGR.COM
WWW.SUPERIORENGINEERING.COM.AU
WWW.LOCKTUP4X4.COM.AU
Top
Posts: 358
Joined: Mon Apr 16, 2007 10:35 pm
Location: Brisbane QLD

Post by [gubeaut] »

when i undid the two bolts and the screws around the top end the motor only comes out about 20-30 mm it seems to stop on the pos terminal
4INCH EFS LIFT
SUPRERIOR ARMS
TWIN LOCKERS
11000LB tigerz11 WINCH
36 swampers OFF ROAD
3inch S/S/S exhaust
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests