Hi everybody, yesterday i bought a 2L engine to replace my blown one, it is from an 88 model and i have an 84 model engine, my problem is that all the wiring is different and the 2 main plugs on the right hand side of the engine bay are completely different, as well as the 2 plugs on the fuel pump.
is there anyway of swapping these plugs or the whole loom over or if i swap the fuel pumps over will that work?
cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
2L different wiring
Moderators: toaddog, Elmo, DUDELUX
Pics would be good...ive been thru this swap....except mine was putting a 84 engine in my 86 hilux...the only differance in the looms are the 84 is smaller and doesnt have a sensor on the bottom of the intake...and the newer hiluxes have a bigger loom for the sensor on the intake...Not sure about the injector pump...unless you have a engine out of a surf of cressida maybe? the wiring on those pumps and engines are totally different and some have a tps on the pump.
hopefully someone else will have some better info for you.
hopefully someone else will have some better info for you.
Who is online
Users browsing this forum: No registered users and 1 guest