Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

rust prevention products

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 422
Joined: Wed Nov 22, 2006 1:47 pm
Location: surf coast, victoria

rust prevention products

Post by cruiser60series »

Got the roof of my troopy so have unique access to the cavity between the skins of the panels.

I want to squirt some sort of goop down there to prevent/delay rust in the future.

Any ideas what product i should try using?
At first I thought it was a sea anemone, upon closer inspection I realised it was a funky ball of tits from outer space.
Posts: 171
Joined: Sat Feb 11, 2006 1:38 pm
Location: Brisbane

Post by Wilko76 »

fish oil or lanolin in my opinion
Posts: 204
Joined: Mon Dec 31, 2007 9:32 am
Location: Gold Coast

Post by kitacooch »

lanolin
Posts: 106
Joined: Wed Dec 19, 2007 10:11 pm
Location: Sydney

Post by carrot »

Would the lanolin flow around in the cavities, or does it need to be applied directly to the surface to protect? (I've never used it before.)
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

50/50 mix of lanolin and cavity wax.
Cavity wax comes in 4 litre tins like thinners and is available at auto paint suppliers and sometimes at Supercrap.
Posts: 487
Joined: Wed Dec 06, 2006 10:31 pm
Location: latrobe valley/vic

Post by Wish I had coils »

NOT REAPEAT NOT FISH OIL Just just some rust out of the roof today.
My mate warned me that it stinks. I sprayed it a little and thought thats all right . BUT.......... the smell gets stonger and stronger now the patrol smells like off fish and i sprayed it were i thought it would be right .

Lanoline is ok at least sheep smell better then fish and it's a turn on for new zealanders
Posts: 242
Joined: Wed Jul 11, 2007 9:38 am
Location: stuck in a hole. not offroad, just deception bay

Post by mrw82 »

the fish oil smell will go away after a few weeks. :shock:

you can buy odourless fish oil now too.

whats everyones opion on the electronic rust systems. are they the goods or just a big scam. be good to hear it from someone that has one fitted.
Posts: 106
Joined: Wed Dec 19, 2007 10:11 pm
Location: Sydney

Post by carrot »

mrw82 wrote:the fish oil smell will go away after a few weeks. :shock:
Yep
mrw82 wrote: you can buy odourless fish oil now too.
I used some 'deodourised' fish oil. It smells like fish.
:roll:

Well, for the first few weeks anyway.
Posts: 3385
Joined: Fri Sep 17, 2004 8:26 pm
Location: Melbourne

Post by shakes »

get with the time's fish oil and lanolin are from the dark age's

por15 is THE ONLY way to go for stuff like this providing you can reach something in there to paint it on (brush)

not cheap but you won't find a better product for rust prevention
http://www.por-15.com.au/

Simon
Yom
Posts: 1233
Joined: Tue Oct 16, 2007 1:13 pm
Location: Brisbane

Post by Yom »

absolutely no point in using por15 on an old car which has already got rust developing inside it somewhere. and any 4wd which has been used as a 4wd or lived near a coastal area will be oxidising somewhere.


especially if its japanese :P
Posts: 792
Joined: Wed Mar 24, 2004 11:54 am
Location: Brisbane

Post by Pinball »

mrw82 wrote: whats everyones opion on the electronic rust systems. are they the goods or just a big scam. be good to hear it from someone that has one fitted.
Try a search, been well discussed...

but my opinion is the ERPS is doin a fair job on the Sierra. MiL had paint on and an electronic system fitted at a Toyota dealer on her new 100 series, musta hooked it up in reverse coz she had chassis cancer within 3 months, swapped it out for an ERPS and seems to have stopped the spread two years later.

Spock
www.pointnshoot.org
Suzuki Auto Spares Springwood
Century Batteries
Sylverkey
Extreme Coatings
Control Synergy
Posts: 422
Joined: Wed Nov 22, 2006 1:47 pm
Location: surf coast, victoria

Post by cruiser60series »

Yom wrote:absolutely no point in using por15 on an old car which has already got rust developing inside it somewhere. and any 4wd which has been used as a 4wd or lived near a coastal area will be oxidising somewhere.


especially if its japanese :P
I fit all of those categories :cry: panels have a short life on my property

sounds like lanolin and cavity wax will be the go, I'll make some squirty nozzle thing and shoot it down into the panels. Should it take long to dry/set?
At first I thought it was a sea anemone, upon closer inspection I realised it was a funky ball of tits from outer space.
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

The beauty of 50/50 lanolin and cavity wax is that it stays liquid for ever under the skin it forms.
The more liquid it is the better the penetration.
Fill every nook and cranny and leave it alone for a week or two and then go for a long drive on a dusty road. The dust will help to form a skin so no more dribbles. After that, forget all about it for a year and then repeat.
Posts: 1413
Joined: Mon Aug 21, 2006 5:54 pm
Location: Perth

Post by Moph »

shakes wrote:get with the time's fish oil and lanolin are from the dark age's

por15 is THE ONLY way to go for stuff like this providing you can reach something in there to paint it on (brush)

not cheap but you won't find a better product for rust prevention
http://www.por-15.com.au/

Simon

Agreed ... POR15 is the shizz. Have seen it used in numerous industrial applications, including after fire events where the intense heat strips the galv off galvanised steel, and it is pretty impressive. It must be pretty much impermeable as it stops oxidation occuring under the coating, ie if you paint it on a mildly rusted (not scaling) surface it will stop rust there. As you say though, only good for brush on so not feasible where access is difficult.
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests