Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Gigglepin
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Gigglepin
Wayne here, give me a call. I have everything in stock at the moment.
0429 363 745
0429 363 745
Gigglepin
No grass cutting being done chunderlicious, I supply Dave the Gigglepin winch products.
Nice one Smithy!Don't forget Wazza's adapters as well. Definitely a cheaper option but doesn't upgrade the entire top housing like the Gigglepin.
Last edited by nzdarin on Tue Feb 05, 2008 2:51 pm, edited 1 time in total.
93 Nissan Pathfinder / Terrano Turboed VH45, GQ Trans and T-case, coil overs, hydraulic winch and fair bit of other stuff. (Currently a pile of parts in the workshop)
Flamin' Fabrications had a good write up in 4wd Action this month.nzdarin wrote:Don't forget Wazza's adapters as well. Definitely a cheaper option but does upgrade the entire top housing like the Gigglepin.
[quote="Uhhohh"]As far as an indecent proposal goes, I'd accept nothing less than $100,000 to tolerate buggery. Any less and it's just not worth the psychological trauma. [/quote]
http://www.gigglepin4x4.net/homepage/main.htmlove_mud wrote:for the technically challanged .. what exactly is a gigglepin .. and does you have a pic of one unattatched.
For all your HID and LED stuff
http://offroadindustries.com.au/
Check us out on Facebook for weekly specials
www.facebook.com/pages/Offroad-Industries/137501182955527
http://offroadindustries.com.au/
Check us out on Facebook for weekly specials
www.facebook.com/pages/Offroad-Industries/137501182955527
Gigglepin
Gigglepin manufacture the twin motor replacement gearbox tops for 8274 high mounts. The new gearbox top completely replaces the Warn gearbox top, and has a stronger set of gears, supported by roller bearings, and a faster ratio. With two motors pulling we can increase the winch line speed by changing the gear ratios in the Gigglepin gearbox top housing.
The Adapter + Motor is $1550.. ready to bolt onto your highmount winch.LuxyBoy wrote:Costs?
Flamin Fabrications don't have prices up and gigglepin are all in pounds.
Wayne how much do all the winch upgrades coast in Aus $
Anyone know Flamin Fabrications prices
Adapter can be sold separately.
Any other questions, feel free to call me. 0419 386 703
Cheers
Wazza
www.flaminfabrications.com.au
Now available Faster Gearing for Highmounts!!!
0419 386 703
Now available Faster Gearing for Highmounts!!!
0419 386 703
thanks .. that is basically what I thought it would be .. nice to get these things strait in you head thoughweeman wrote:http://www.gigglepin4x4.net/homepage/main.htmlove_mud wrote:for the technically challanged .. what exactly is a gigglepin .. and does you have a pic of one unattatched.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Gigglepin
The Gigglepin Replacement Gearbox top is $ 2025.00
This includes the high speed internal gears, fully supported on roller bearings, and a replacement/stronger drive gear that activates the brake assembly.
Optional extras, which are highly recommended are:
Upgraded/strengthened mainshaft and Cam gear
Replacement Brake Pads made from a engine clutch type material $70.00
I have seen standard winch's break main shafts, so when running twice the motor, it makes sense to replace the internals with a stronger shaft and gear arrangement. Just sorting out a deal on the main shafts, so I will advise the price asap, (cheaper than they used to be).
The brake pads are handy particularly if you go through allot of water, and i have been told they eliminate the shudder effect some winch's have under breaking, plus they are have a bigger surface area for more efficient braking.
This includes the high speed internal gears, fully supported on roller bearings, and a replacement/stronger drive gear that activates the brake assembly.
Optional extras, which are highly recommended are:
Upgraded/strengthened mainshaft and Cam gear
Replacement Brake Pads made from a engine clutch type material $70.00
I have seen standard winch's break main shafts, so when running twice the motor, it makes sense to replace the internals with a stronger shaft and gear arrangement. Just sorting out a deal on the main shafts, so I will advise the price asap, (cheaper than they used to be).
The brake pads are handy particularly if you go through allot of water, and i have been told they eliminate the shudder effect some winch's have under breaking, plus they are have a bigger surface area for more efficient braking.
Gigglepin
Currently we do not have a free spool system available, but in a couple of months we will have a free spool option up and running. I will let you know when it is available.
Who is online
Users browsing this forum: No registered users and 130 guests