Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

New shockies...

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 445
Joined: Fri Jul 13, 2007 12:58 pm
Location: Mount Annan

New shockies...

Post by dans-paj92 »

hey,
about to do a suspension lift on my gen1 swb pajero... does anyone kno the shocks i need to get for a 2 inch lift front and back??? my front shockies are at full travel already and thats when it hits the upper wishbone bump stops.. and my rear shockies only have about 5cm left in them when the back is at full articulation... my front shocks are monroes and are pin at the top and eye at the bottom...

thnx Dan..
'84 4Runner, 2.4TD, 12psi Boost, 4" Suspension, 2" Body, 4.88's, 35's, Narva Spotties, Winch, Power Steering, MTX Sub, Racing Seats, Front Auto Lokka, Crawler Gears
Top
Posts: 1130
Joined: Thu Nov 18, 2004 7:25 pm
Location: New Zealand

Post by NJV6 »

Dan,

The fronts will be fine as lifting it will not actually gain you any more travel - just resets your base level. If your shocks are not running short how it is now then it'll be fine. As for the rear, lift it as you were then get some measurements and go from there. But chances are your shocks will be fine for that as well.
1994 NJ SWB, 3.5, 5 speed manual, 33's, XD9000, 4.9 diffs, Front & Rear ARB's, Safari Snorkel

2008-2009-2010-2011 Pavlova in the shed.
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 1 guest