Silly little thing has halted the Pathy project. The actuator in the g'box does not engage the reverse switch. I bought new switch and if manually applied then lights work but not when new switch fitted to g'box. Before I go in blind and pull out the box has anyone got any ideas or knowledge on these and can point me in the right direction.
1987 Pathfinder with Z24 and 5 speed.
Silly thing is that the box and engine will come out soon anyway... Maybe I just see an engineer and do the conversion and then get RWC.
Hobzee
0417 486 637
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Pathfinder reversing light actuator in g'box
Set a switch up so that when you engage reverse the gear shift lever activates it. You should be able to find a 'large' micro switch from DSE or the like that will do the job for you. Just hide it under the consul or boot.
Other than that. I have a 5 speed (rooted) that you can have for the required part.
Other than that. I have a 5 speed (rooted) that you can have for the required part.
GU3 Patrol Wagon.
switch
Thanks for that - I will try the switch thing this weekend and PM you if I need the box...
Who is online
Users browsing this forum: No registered users and 0 guests