Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

60 series gearbox to transfer case connecting pipe

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 2
Joined: Tue Feb 12, 2008 7:33 pm
Location: SEQ

60 series gearbox to transfer case connecting pipe

Post by raw84 »

I have a 1984 60 series diesel, recently purchased. There is a is a small pipe connected between the gearbox and the transfer case filler plugs. There is a brass fitting tapped into each plug to connect the pipe. Can anyone tell me why?
Top
Posts: 184
Joined: Mon May 21, 2007 10:15 am
Location: floatin around

Post by 302 cruiser »

at some stage your seal between the transfer and gearbox has leeked pushing all the out from one into the other the pipe is put there instead of fixing the seal so the oil will keep circulating instead of running your transfer dry

Cheep fix
Top
Posts: 65
Joined: Sun Sep 16, 2007 8:39 pm
Location: Adelaide

Post by PeterInSa »

Also Cheap Insurance, even if you check the Transfer case/Gearbox oil levels every 5000Ks when you change your engine oil, to ensure the oil in both boxes are level, a long high speed trip could allow the gearbox to suck the oil from the transfer case, if the connecting seal is worn.

Peter
Top
Posts: 2
Joined: Tue Feb 12, 2008 7:33 pm
Location: SEQ

Post by raw84 »

Thanks for the info. Much appreciated.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests