Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

To Rebulid a 1FZFE ???

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 627
Joined: Sun Mar 27, 2005 7:51 pm
Location: Sydney

To Rebulid a 1FZFE ???

Post by guzzla »

The old girl (96 mod 80s) had 211k on the clock and im again looking at turboing it. My delima is weather I should have the engine rebuilt now along with dish top pistons and slightly lower comp and do it properly the first time or get the all clear with a leak down tests and go for broke. Im not looking at running massive boost - no more than 10psi just to be on the safe side.

If i rebuild it first I wont be putting the turbo on ASAP (maybe 6 months later) as my current funds will only allow for the rebuild or putting the turbo str8 on.

Everyone I know who has turboed a 1FZFE has just put it str8 on without incident and those that have had trouble has been via not keeping an eye on lean out.

Also if I was to have it rebuilt is it going to make muck difference in over all drivability running slightly lower comp etc.

Id bee keen to hear from people who have first hand experience with this or similar situation.

Regards,
Nathan
IF IT MOVES, SHOOT IT
IF IT DOESNT, CUT IT DOWN
IF ITS GREEN, PISS ON IT
Top
Posts: 2809
Joined: Mon Jan 02, 2006 5:03 pm
Location: Lara Victoria

Post by Ruffy »

I'd just bang the turbo on. Tune it correctly and you shouldn't have an issue.
[quote="Uhhohh"]As far as an indecent proposal goes, I'd accept nothing less than $100,000 to tolerate buggery. Any less and it's just not worth the psychological trauma. [/quote]
Top
Posts: 72
Joined: Thu Jan 04, 2007 6:55 pm
Location: Melbourne, VIC

Post by DGS4WD »

I personally wouldn't worry about it but I would recommened getting your valve clearences checked and adjusted if you havn't already in the last 40,000kms or so.
T.L. 93 80 4.5 GXL Man
Gigglepin winch, beadlocked 37x12.5-17 sticky treps, flip arm, high steer, 6" dobinsons, 33" boss's, longfields, 4.56 diffs, 25% low range, lockers
Team: Cause For Concern
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 0 guests