Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Laws on lifts

Tech Talk for Rover owners.

Moderator: Micka

Post Reply
Posts: 104
Joined: Mon Sep 08, 2003 10:50 pm
Location: left of center

Laws on lifts

Post by tiggr »

Greetings to all , i have been following roughly the debate on body suspension wheel lift's and like everything Gov.-Dept of Planning and Infrastructure - it's getting fairly murky .
I believe that cops Aust wide will be enforcing this and a 50mm lift will be legal and that incorp body, tyres, and springs unless you for go a lane change test driven by a C.A.M.S approved driver unless your 4x4 weighs over GVM 3500KG . This is also being heavily debated and watched by the insurance vampires , and you must at ALL times be able to produce your blue slips -permits- .
My Rangie has a 50mm body lift , 3 inch over springs , 34 inch muddies so my "eye brow height" has far exceeded this and i don't really want undue attention from the boys in blue , so my questions are ....does anyone hve FACTUAL information on this to further any points ect that have come to light .Im not interested in HEARSAY or CIRCUMSTANTUAL !!
thanks guys n girls
discourage inbreeding , ban country music ! Rover didn't make computers as they just couldn't find a way for them to leak oil .
Posts: 82
Joined: Wed Sep 10, 2003 4:14 pm
Location: Sydney

lifts

Post by Rangee »

i have a sargent rent a rom in my house when he is on his shift work at the station, i will ask him what the deal is cause i am about to do the suspension and body lift as well
will let you all know
cheers
Virgins !!!
someone has to go first !
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest