I have just had my LT77 gearbox replaced with an LT77 out of a '88 Range. I am now having problems with it being hard to get into 1st thru to 4th and cannot get it into 5th at all. Major crunch every time. It will also hit 5th frequently when trying to get it into 3rd. Previously you had to pull it hard to the right to select 5th. We had to swap over all the selector assembly from old to new, as the later models had the gear levers swapped around.
Has anyone had this or know what could be the cause. The mechanic who has done the work has 30 odd years experience, but his is unsure of the problem. Need it fixed for Christmas Holidays.
Thanks in advance
Steve
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Gearbox Swap
Moderator: Micka
Hard to select gears sounds like a clutch problem.
Is the clutch bled prooperly.
The sloppy gear shift sounds like detent springs not set correctly.
Michael
Is the clutch bled prooperly.
The sloppy gear shift sounds like detent springs not set correctly.
Michael
Mitsubishi 2010 NT DID Pajero wagon, Factory rear diff lock, Dual batteries, ARB bar, winch, Mt ATZ 4 rib tyres.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
Who is online
Users browsing this forum: No registered users and 0 guests