ok guys im currently running 36"x12 pedes on my 7" lifted GU wagon and im want to put on some 38x15.5s and want to hear from anyone who has a gu with 38s and how bad did it scrub on front inner guards and did it hit radius arms etc on full lock??
I dont want this to be a discussion as to why i want 38s i would just like a bit of help!
I have fully flexed up with my s6s and it seems that 38 would be fine i would just have to extend my rear bump stops to it doesnt hit off the rear flairs, but wtill would like personal experiance's
Cam
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
38's on GU
38x12.5's on 10" rims and they scrub just a smiggin on the tray at full artic. +5" springs, 1" spacer, 2" body lift.
35x14.5 thornies scrub out on the rear chassis rail, but of course miss the tray. Your 15.5's may just do both --- but this is at full flex.
Up front in the inner guards may just need some minor trimming possibly.
35x14.5 thornies scrub out on the rear chassis rail, but of course miss the tray. Your 15.5's may just do both --- but this is at full flex.
Up front in the inner guards may just need some minor trimming possibly.
Bushies: http://www.angelfire.com/on4/bushy5560/ http://www.angelfire.com/on4/bushy5561/
Lightforce HID conversion stuff: http://www.angelfire.com/on4/bushy5551/
Lightforce HID conversion stuff: http://www.angelfire.com/on4/bushy5551/
The 38x 15.5 x15's are are on 15x12's on a GQ chassis apart from the gaurd clearance they did not fowl on the chassis or steering.
They are now on a SOA MQ chassis and still dont hit anything, just extend the bumpstops
Hoppy
They are now on a SOA MQ chassis and still dont hit anything, just extend the bumpstops
Hoppy
[quote="RAY185"]Oh, and being able to lick your eyebrows is a sure way into a womans "heart". ;)[/quote]
I had to make a little room in my fenders with larger front f/glass flares and cut some steel around the front body mount on the front, and ran 38 x 13/16 swampers, and 37" road tyres, and had a set of 40 x 16.5/17 s on 17 x 10" rims with 3.75" backspacing, that just touched everywhere.
It is possible to fit 38"s, and if for bush the 38 x 13 swampers are the go.
My GU on the 39'5's
and 37 x 13.5's
It is possible to fit 38"s, and if for bush the 38 x 13 swampers are the go.
My GU on the 39'5's
and 37 x 13.5's
i nice to see in the top picture you included the jeep that you guys at ATS F**cked up and had to spend 3 weeks at the auto elecs and countless weeks at KJ's offroad before it was even driveable.
Seriously this clown at ATS tried to sell me used simex centerpedes as brand new. avoid his business at all costs!
Seriously this clown at ATS tried to sell me used simex centerpedes as brand new. avoid his business at all costs!
ats4x4dotcom wrote:found some shots that show what we trimmed to fit them
Last time this shit went on we lost the for sale section for 3 months.NutterGQ wrote:LOL thats funny as!!vanbox wrote:
In the red corner we have "ats4x4dotcom" in the blue corner we have "dillza_69", ladies and gentleman let the battle begin...
Keep and slander to your selves!!!
GU III TD42T UFI18G Cross Country IC, 20 PSI. Neeeeeed mooooore Fueeeeeel.
[quote="dillza_69"]i nice to see in the top picture you included the jeep that you guys at ATS F**cked up and had to spend 3 weeks at the auto elecs and countless weeks at KJ's offroad before it was even driveable.
Seriously this clown at ATS tried to sell me used simex centerpedes as brand new. avoid his business at all costs!
Yes, well, funnily enough, we didnt do any wiring on that vehicle, apart from remove the existing computer, and the loom, and new computer and loom were supplied by the owner from Castlemaine auto electrics, and the owner of the jeep had the same issue as you did, dealing with the same person, as far as time frames went, and completion, and they were 38" swampers, [not centepedes] which were mine i told you were roaded, and I showed them to you, he then tried to sell you as new I believe.
As much as that was the owner of the business, and your dad came in and stopped you from being allowed to purchase the vehicle you ordered, that was constructed for you, I would apreciate you name the person you dealt with, and stick to the facts, rather than tar us all with the same brush, based on assumptions.
The jeep is currently down having tailshafts made, and still isnt/hasnt been drivable since it left here.
Dont wish to start a war, and I understand why you have issues, but I do think the facts are important in such cases as this.
Seriously this clown at ATS tried to sell me used simex centerpedes as brand new. avoid his business at all costs!
Yes, well, funnily enough, we didnt do any wiring on that vehicle, apart from remove the existing computer, and the loom, and new computer and loom were supplied by the owner from Castlemaine auto electrics, and the owner of the jeep had the same issue as you did, dealing with the same person, as far as time frames went, and completion, and they were 38" swampers, [not centepedes] which were mine i told you were roaded, and I showed them to you, he then tried to sell you as new I believe.
As much as that was the owner of the business, and your dad came in and stopped you from being allowed to purchase the vehicle you ordered, that was constructed for you, I would apreciate you name the person you dealt with, and stick to the facts, rather than tar us all with the same brush, based on assumptions.
The jeep is currently down having tailshafts made, and still isnt/hasnt been drivable since it left here.
Dont wish to start a war, and I understand why you have issues, but I do think the facts are important in such cases as this.
ats4x4dotcom wrote:dillza_69 wrote:i nice to see in the top picture you included the jeep that you guys at ATS F**cked up and had to spend 3 weeks at the auto elecs and countless weeks at KJ's offroad before it was even driveable.
Seriously this clown at ATS tried to sell me used simex centerpedes as brand new. avoid his business at all costs!
Yes, well, funnily enough, we didnt do any wiring on that vehicle, apart from remove the existing computer, and the loom, and new computer and loom were supplied by the owner from Castlemaine auto electrics, and the owner of the jeep had the same issue as you did, dealing with the same person, as far as time frames went, and completion, and they were 38" swampers, [not centepedes] which were mine i told you were roaded, and I showed them to you, he then tried to sell you as new I believe.
As much as that was the owner of the business, and your dad came in and stopped you from being allowed to purchase the vehicle you ordered, that was constructed for you, I would apreciate you name the person you dealt with, and stick to the facts, rather than tar us all with the same brush, based on assumptions.
The jeep is currently down having tailshafts made, and still isnt/hasnt been drivable since it left here.
Dont wish to start a war, and I understand why you have issues, but I do think the facts are important in such cases as this.
ok then it was cliff that we delt with, and no my dad didnt come down and stop me from buying the vehicle, i simply told him the story of cliff trying to sell second hand tyres as being brand new. When he arrived and asked cliff to come out of his little hole behind the counter and show him these apparently "new" tyres he agreed at first then realised if he took one step outside the shop he was going to get laid out.
and that jeep was at gordon avenue auto elecs in geelong today anyone not believing can call them on 52292404 just ask them what they think of ATS 4X4. in order to keep this issue off this forum let me know if you (nameless person behind ATS4X4) would like me to come back into the shop, this time maybe cliff wont be so gutless. The day after we walked away from your bodgy deal you sold the tyres as second hand used twice for just over $1000 to the bloke in the GQ coil can with RIGID stickers down the side.
mate you already have a bad name around geelong maybe you should stop ripping people off.
the purpose of all this is purely to warn other people about ATS4X4, they have alot of potential it is unfortunate cliff lets them down by lying out of his ass
if you have a problem, then go down in person and have a word to darren.. theres always 2 sides to stories on forumzdillza_69 wrote:ok then it was cliff that we delt with, and no my dad didnt come down and stop me from buying the vehicle, i simply told him the story of cliff trying to sell second hand tyres as being brand new. When he arrived and asked cliff to come out of his little hole behind the counter and show him these apparently "new" tyres he agreed at first then realised if he took one step outside the shop he was going to get laid out.
Like I said, we didnt do any wiring on that vehicle, except remove the existing computer and some of the loom. An auto electrician may have done some electrical work on it, and ringing the auto elec would prove nothing, as they cant confirm we did it or not either.....dillza_69 wrote:ats4x4dotcom wrote:dillza_69 wrote:ok then it was cliff that we delt with, and no my dad didnt come down and stop me from buying the vehicle, i simply told him the story of cliff trying to sell second hand tyres as being brand new. When he arrived and asked cliff to come out of his little hole behind the counter and show him these apparently "new" tyres he agreed at first then realised if he took one step outside the shop he was going to get laid out.
and that jeep was at gordon avenue auto elecs in geelong today anyone not believing can call them on 52292404 just ask them what they think of ATS 4X4. in order to keep this issue off this forum let me know if you (nameless person behind ATS4X4) would like me to come back into the shop, this time maybe cliff wont be so gutless. The day after we walked away from your bodgy deal you sold the tyres as second hand used twice for just over $1000 to the bloke in the GQ coil can with RIGID stickers down the side.
mate you already have a bad name around geelong maybe you should stop ripping people off.
the purpose of all this is purely to warn other people about ATS4X4, they have alot of potential it is unfortunate cliff lets them down by lying out of his ass
Now, next fact, those rims and tyres didnt go for $1000, I know, they were mine, and I sold them, regardless of what he told you, maybe get your dad to sort that one for you too.......
And as you confirmed, your dad did come down and sort your mess you created, for you, now I dont deny you got your dad to sort out your issue with Cliff, but I do ask youa ctually be factual about your accusations, and about exactly who your dad had to deal with to fix your dilema for you, after your mate was no longer able to speak on your behalf.
As for thinking violence would be tolerated in the workshop, by all, or any here, regardless, is a very immature outlook, and one you best think long and hard about, before getting yourself into any more situations that you cant resolve on your own, as an adult.
Do you see the irony here, that your accusing people of being dishonest, and you have now done the same thing yourself, do you see what effect that is having on you? your asking people to call a business that saw the vehicle a month after it left here, to confirm something you said, do you see that makes you no better in the honesty stakes than the person you had the issue with.....
Im done on this subject, but I am happy to discuss it by pm or phone with anyone who may require more information, as I have no axe to grind, not being involved in the initial process, only wanting to ensure the information is correct.
please resume normal programming.
Who is online
Users browsing this forum: No registered users and 33 guests