Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

HJ47 Mirrors

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 13
Joined: Mon Feb 25, 2008 12:26 pm
Location: Charters Towers

HJ47 Mirrors

Post by Breeze »

G'day all,

I've just replaced the old mirrors on my '81 HJ47 because they were flopping all around the joint.
I bought 2 new ones from a well know ebay seller, but they are just as bad as the old ones.
Can anyone tell me if there is a way of tightening them up? (besides filling the body with liquid nails).

Cheers,
Dean
Top
User avatar
RAY185
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Post by RAY185 »

they should have a couple of phillips head screws to tighten the back of them onto the ball that they swivel on (and to loosen enough to pop them on and off for replacement). The fixed nut on the other end of the screws might be spinning if you've already tried this.
Top
Posts: 106
Joined: Sun Jul 08, 2007 3:11 pm
Location: CoffsHarbour

Post by Stoive »

they're 10 bucks from autobarn as well, usually in stock too
Top
Posts: 13
Joined: Mon Feb 25, 2008 12:26 pm
Location: Charters Towers

Post by Breeze »

thanks fellas.

It's no so much the head but the swivel on the arm where it connects to the door.
As soon as a truck passes or a branch clips,the arm moves.
Is there any way of tightening the spring assembly?
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest