Injecting RB30 Patrol

[gqlwb]

Hi i have just gotten all the the parts to inject the rb30 im just wondering if anyone can help me with wiring it up and how to adapt the lpg to work aswell.
Parts i have are:
Vl inlet manifold
Air flow metre
EFI fuel pump & regulator
Engine loom
Dizzy/coil
Oxy sensor
impco 225 mixer
vl manual computer
Throttle cable and bracket.

[NutterGQ]

go to calaisturbo forums you'll have more help there, with that said though why are you wasting that time and money injecting it if your gonna run LPG through a shitty 225 mixer?

Is the throttle cable of the VL or off a 4.2 patrol? also i'm not 100% sure anymore but i think vl/r31 used different timing cover because they had the trigger on it.

[oondy]

Get a gregory's workshop manual for a VL, if thats what all the gear camde out of, otherwise a skyline. I used the VL manual when I put an RB30E in my WB ute, just studied and read the electrical diagrams a few times until it sort of made sense but was relatively easy in the end.

cheers

OONDY

[currentlyoffline]

Send matt an email, he should be able to come up with a plug and play style loom if you can't do it yourself.
info@injectedholdens.com