Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

testing a tachos accuracy

For all things Electrical.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

testing a tachos accuracy

Post by j-top paj »

got a tacho on the boat for my outboard, but how do i test to see if its accurate?
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Top
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

i was thinking of hooking it up to another tacho i have and compare the two.
its a 3cyl 2 stroke, so do i set the other tacho to 6cyl and just halve it?
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Top
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

j-top paj wrote:i was thinking of hooking it up to another tacho i have and compare the two.
its a 3cyl 2 stroke, so do i set the other tacho to 6cyl and just halve it?
That should work, but I think it will be doubling the reading not halving it. Anyway you'll be able to tell pretty easily.
This is not legal advice.
Top
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

it doesnt have to be spot on, just enough so i can figure out where the motor is most economical
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Top
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

A four stroke fires each cylinder every second revolution; a two stroke fires every revolution.

3 cylinder 2 stroke & 6 cylinder 4 stroke should both fire three spark plugs every revolution.
Top
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

so if its set to 6cyl then it should give an accurate reading?
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Top
Posts: 1152
Joined: Mon Sep 25, 2006 8:25 pm
Location: the most livable planet in the universe

Post by its aford not a nissan »

dont outboards have seperate coils for each cyl??
Top
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

yeh mine does..
but there is a plug on the control box up front that has all the wires for the tacho.
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Top
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

Each coil will fire only once per revolution, so your pulse rate will be the same as a 2 cylinder 4 stroke.

I'm not sure what to do there.
Top
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

all sorted, thanks guys

there is a single trigger wire from the control box,
the tacho was only out by a little bit
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Top
Post Reply

Return to “Auto Electrical”

Who is online

Users browsing this forum: No registered users and 0 guests