Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

lead replacement??

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 38
Joined: Sat Dec 30, 2006 4:03 pm

lead replacement??

Post by keatings »

I have just bought an 85model swb 1.3lt suzi, Can I use straight unleaded or should I put in an additive to replace the lead.??
Top
Posts: 813
Joined: Wed Aug 18, 2004 10:21 pm
Location: Hobart

Post by Spike_Sierra »

an expert will probably tell me differently, but suzuki's didnt make there head out of cheese parts, and i have been running unleaded since forever. seems to be ok.
85 LWB w. FRP Canopy
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
Top
Posts: 38
Joined: Sat Dec 30, 2006 4:03 pm

Post by keatings »

thanks mate I will give it a go and see how she performs. I just didnt want to damage a good motor. The guy I got it from says he has been using an additive forever so hopefully I wont wreck it.
Top
Posts: 154
Joined: Sat Nov 17, 2007 12:08 pm
Location: why should i tell you

Post by over land 4x4 »

ummm i think zook's are all unleaded iv got a 85 swb and it has a stamp on the side (unleaded only)
I dont know squat!!!!!!!!!!

"Just when I think you've gone and said the stupidest thing ever, you keep on talking!"
Top
Posts: 2600
Joined: Thu Sep 27, 2007 2:40 pm
Location: Townsville

Post by GRPABT1 »

Spike_Sierra wrote:an expert will probably tell me differently, but suzuki's didnt make there head out of cheese parts, and i have been running unleaded since forever. seems to be ok.
It's usually the valves that are the worry in using unleaded in a leaded car.
Top
Posts: 813
Joined: Wed Aug 18, 2004 10:21 pm
Location: Hobart

Post by Spike_Sierra »

GRPABT1 wrote:
Spike_Sierra wrote:an expert will probably tell me differently, but suzuki's didnt make there head out of cheese parts, and i have been running unleaded since forever. seems to be ok.
It's usually the valves that are the worry in using unleaded in a leaded car.
yeah, i should have put head, and internals(eg valves and seals)
85 LWB w. FRP Canopy
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
Top
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

Running unleaded in engines made for leaded fuel damages the valve seats by hammering them up into the head.
The term is 'valve seat recession'.
Suzuki's all (4 strokes)have alloy heads and therefore already have hardened valve seats (Stellite) so unleaded is fine with or without additives. :D
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 1 guest