Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Where to buy rubber flare's

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 253
Joined: Thu Oct 19, 2006 8:03 pm
Location: Melb

Where to buy rubber flare's

Post by ORSM4B »

Hi guys can't find the rubber flare material any cheaper that $17 a meter in VIC does anybody know where l can buy it cheaper..

Cheers Chris
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

Posts: 253
Joined: Thu Oct 19, 2006 8:03 pm
Location: Melb

Post by ORSM4B »

Yeah they want 19 per meter surely someone sells it cheaper....
Posts: 578
Joined: Sun Jun 17, 2007 6:44 pm
Location: melbourne

Post by Wambat »

i got enough to do a whole car jsst sitting at home give me a price. am in melb payed the rip off rate for it.
Go Hard Or GO Home
Posts: 36
Joined: Wed Apr 13, 2005 9:00 pm
Location: Melbourne

Post by lariens »

The clark rubber ones has a wire hole around the outer. With the wire inserted they hold shape well and dont sag! Comes down to the look you want$
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

TJM sell the bushranger stuff.. think theres enough for 2 cars in them. but cant be sure, mate gave me enough for my GQ, and did his, but he may have already had some.

I like the wire edge stuff, much better.

Some dudes are real tight and use garden edging from bunnings
Posts: 2775
Joined: Thu Apr 13, 2006 8:59 pm
Location: Melbourne

Post by GQ Bear »

I got enough to do the trol from Don Kyatts in Moorabbin for around $60-$70. It's the one with the wire hole. I used coat hanger wire. Still looses shape a bit, but not as bad as no wire.

I like the garden edging stuff. If i was to do it again i'd use this stuff

TIP: use washers or metal strip on screws. I didn't and some screws have pulled through rubber when it gets knocked around
[color=violet]G[/color][color=white]O[/color][color=yellow] S[/color][color=blue]T[/color][color=yellow]O[/color][color=white]R[/color][color=violet]M[/color]
Premiers 1999, 2007, 2009
Spoon 2010
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

I got mine (without the wire) in 2" from Clark rubber for $11.95 per metre. :D
The stuff with the wire may hold its shape but if you hit something and bend it, it will stay bent too!.
Posts: 762
Joined: Tue Oct 26, 2004 6:46 pm
Location: Diamond Creek

Post by mule75 »

bunnings garden edging!! comes up heaps better :D :D :D
Posts: 106
Joined: Wed Dec 19, 2007 10:11 pm
Location: Sydney

Post by carrot »

How do these things attach to the guard? From memory the metal flange that faces the wheel (that the flare would be flat up against) is only around 8mm wide. Do you just put lots of self tappers into that?
Posts: 16
Joined: Tue Feb 26, 2008 2:59 pm
Location: usa

Post by mousee »

If you want a really inexpensive way, find yourself a tyre retreader and get a roll of outdated tread rubber. You can get it up to like 8"s or so... I got a full roll of a traction style truck tread for free. The only downside is that it is quite heavy compared to the thin flare stuff...

Heres a pic.

Edit: actually I need to upload it first :rolleyes:
better to look the fool then to open your mouth and remove all doubt :flippoff:
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

mule75 wrote:bunnings garden edging!! comes up heaps better :D :D :D
But LOOKS cheap! and is hard enough to crush a panel if you lean on it.
Posts: 156
Joined: Tue Sep 27, 2005 7:23 pm
Location: Dandenong ranges

Post by Dyna Beast »

On ebay at the noment there is a place in Dandenong Vic ,Ambassador industrial is the name.Sell both the under edge fixing and side fixing in two widths.I have brought the under edge fixing wider profile at $8.50 per meter.They of course will post any were,or as I did as I live not that far away picked it up.The only minor hitch is they only sell in 10 mtr rolls.It is a good heavy cross section.
Cheers
Hybrid rover ute. Isuzu diesel. Custom suspension. Winch. Snorkel etc. etc.
Posts: 1279
Joined: Wed Jul 28, 2004 9:49 pm
Location: IN THE SHED

Post by GOT MUD »

want33s wrote:I got mine (without the wire) in 2" from Clark rubber for $11.95 per metre. :D
The stuff with the wire may hold its shape but if you hit something and bend it, it will stay bent too!.
id say you and i use the same shop here in caboolture they want $19 a metre but i love there prices up there they are always so much cheaper than the other stores but shhhhh dont tell them ;)
PUT YOUR HANDS UP IF YOU WANT TO GO FASTER
RTD Racing
OFFROAD CARTEL
Posts: 3740
Joined: Sat May 26, 2007 5:04 pm
Location: Licking a window near you

Post by 80's_delirious »

Read the subject line of this post and thought you were after these ready for the big :rainbowafro: parade in sydney :shock: :shock:

http://www.libidex.com/html/cart/produc ... CatalogID=
RN wrote:pussy is out, its the log for me... Thank you Jesus.
Posts: 762
Joined: Tue Oct 26, 2004 6:46 pm
Location: Diamond Creek

Post by mule75 »

want33s wrote:
mule75 wrote:bunnings garden edging!! comes up heaps better :D :D :D
But LOOKS cheap! and is hard enough to crush a panel if you lean on it.
i reckon it looks better.
the proper flair stuff isn't wide enough for my rig either.
Posts: 253
Joined: Thu Oct 19, 2006 8:03 pm
Location: Melb

Post by ORSM4B »

Wambat wrote:i got enough to do a whole car jsst sitting at home give me a price. am in melb payed the rip off rate for it.
Thanks mate for the flare rubber.....

Cheers Chris

Thanks for your reply's
Posts: 98
Joined: Sat Jun 23, 2007 1:53 am
Location: Glenbrook NSW

Post by BEN_R »

mule75 wrote:bunnings garden edging!! comes up heaps better :D :D :D

Yep for sure comes up good
nice and cheap depends what you want
1989 Nissan Patrol GQ, 4.2 Turbo Diesel, 4'' Spring Lift, 2'' Body Lift
[url]http://www.4wdmonthly.com.au/shed/index.php?id=2869&im=1[/url]
Posts: 234
Joined: Tue Apr 03, 2007 7:05 pm
Location: Melburn!

Post by Dexter »

BEN_R wrote:
mule75 wrote:bunnings garden edging!! comes up heaps better :D :D :D

Yep for sure comes up good
nice and cheap depends what you want
Not sure if this is a concern for you guys, but pretty sure that the garden edging stuff would be illegal, due to the sharp edges.
Posts: 578
Joined: Sun Jun 17, 2007 6:44 pm
Location: melbourne

Post by Wambat »

no problems mate hope all goes well
Go Hard Or GO Home
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

I have seen the garden edging used with the trim stuff from around the door on the outside edge. Looked ok if you need extra wide flare.
Posts: 60
Joined: Sun Feb 24, 2008 10:15 am
Location: Melburn

Post by drew4130 »

80's_delirious wrote:Read the subject line of this post and thought you were after these ready for the big :rainbowafro: parade in sydney :shock: :shock:

http://www.libidex.com/html/cart/produc ... CatalogID=
:lol: :lol: :lol: :lol: :lol:
Posts: 51
Joined: Thu May 01, 2008 6:28 pm
Location: Brisbane

Post by mrpham »

I bought the same stuff as the Bushranger and Clark Rubber flexy flares from the Queensland Diesel Spares in Brisbane. I bought 6 meters for $63, so works out to be $10.50/meter.

It has the hole in the edge for inserting wire, it measures 95mm which 65mm protruces from your guards and 23mm goes under your guards.
Post Reply

Who is online

Users browsing this forum: No registered users and 105 guests