Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Info Needed on 80 Ser

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 2
Joined: Mon Dec 10, 2007 10:32 pm
Location: burpengary

Info Needed on 80 Ser

Post by mark10 »

:?: Hi All,

I have a 94 modal 80ser 4.5l all wheel drive and I want to put a 2 wheel conversion in can anyone recommend a brand and type to install and any pros or cons in doing so.

I have been looking in to installing a Hiclone http://www.hicloneqld.com/ to increase fuel economy and increase power any feedback on this would be great.

Mark
Posts: 7
Joined: Tue Feb 19, 2008 2:38 pm
Location: Atwell WA

Re: Info Needed on 80 Ser

Post by Alanrlow »

mark10 wrote::?: Hi All,

I have a 94 modal 80ser 4.5l all wheel drive and I want to put a 2 wheel conversion in can anyone recommend a brand and type to install and any pros or cons in doing so.

I have been looking in to installing a Hiclone http://www.hicloneqld.com/ to increase fuel economy and increase power any feedback on this would be great.

Mark
Hi Mark, Try Marks 4WD Adaptors, they make 2WD conversion kits for the 80s. Find them at www.marks4wd.com
About the Hyclone, don't waste your money, they don't work and when you think about it they can't work. Any "cyclone" effect induced up stream of the throttle body will be long gone once past the throttle plate,(usually only partly open) through the plenum (designed to smooth the air flow) down one of the six runners, stuck behind the valve until finally let into the cylinder.
Hope this helps.
Cheers,
Alan.
Posts: 80
Joined: Sat Aug 06, 2005 7:06 pm
Location: Traralgon

Re: Info Needed on 80 Ser

Post by cpt-mud »

Alanrlow wrote:
mark10 wrote::?: Hi All,

I have a 94 modal 80ser 4.5l all wheel drive and I want to put a 2 wheel conversion in can anyone recommend a brand and type to install and any pros or cons in doing so.

I have been looking in to installing a Hiclone http://www.hicloneqld.com/ to increase fuel economy and increase power any feedback on this would be great.

Mark
Hi Mark, Try Marks 4WD Adaptors, they make 2WD conversion kits for the 80s. Find them at www.marks4wd.com
About the Hyclone, don't waste your money, they don't work and when you think about it they can't work. Any "cyclone" effect induced up stream of the throttle body will be long gone once past the throttle plate,(usually only partly open) through the plenum (designed to smooth the air flow) down one of the six runners, stuck behind the valve until finally let into the cylinder.
Hope this helps.
Cheers,
Alan.
i second this
Posts: 1293
Joined: Mon Jul 18, 2005 10:58 am
Location: Location Location

Post by vSAHARAx »

x3

I also used marks 4wd adaptors kit, and best thing ive ever done!!! Although if your gonna drive it hard off-road ditch the AVM hubs that come with the kit in favour of some factory Aisins off a 75 series ute, Troopy, 60 series or pov pack 80. Hiclones are about as useful as an ash tray on a motorcycle.

Troy
Last edited by vSAHARAx on Tue Mar 04, 2008 8:40 pm, edited 1 time in total.
GXL HDJ80 Cruiser - Lifted, Locked, 315's, 3" Zorst, Safari Intercooled, High Flowed Turbo, All the fruit. AMMS tuned coal shovel, Pushing 148rwhp... + heaps of the black sooty goodness...
Posts: 15
Joined: Thu Nov 29, 2007 12:42 am
Location: Brisbane, Qld, Australia

Post by franku »

x4 on te hiclones - I even tried one just to prove it was all bullsh!t
Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests