Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

engine wont stop

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 65
Joined: Sun Aug 20, 2006 8:06 pm
Location: Kariong NSW 2250

engine wont stop

Post by dybes »

hello again new problem this time...
i turn the key off and my 12ht keeps running, when i lifted up the bonnet and closed the shut off valve i could hear a vacuum noise so i snooped around and the valve on the back of the crossover pipe was cracked ( a vacuum line goes onto the valve) and the brittle part broke off... could this be my problem and what is this part called
Top
Posts: 2347
Joined: Sat Jan 27, 2007 12:56 pm
Location: Perth

Post by Z()LTAN »

lfff
Locktup4x4.com.au - For all of your hardcore gear

Outlaws4x4.com
Top
Posts: 421
Joined: Fri Dec 05, 2003 12:35 pm
Location: Tweed coast

Post by 98lux »

Z()LTAN wrote:lfff
????????????????? :?
if ya gona rev it, Chev it
Top
Posts: 2347
Joined: Sat Jan 27, 2007 12:56 pm
Location: Perth

Post by Z()LTAN »

my bad i typed what i thought it was then i had another think and i was wrong
Locktup4x4.com.au - For all of your hardcore gear

Outlaws4x4.com
Top
Posts: 11
Joined: Thu Sep 09, 2004 7:24 am
Location: NZ

Post by NZBJ71 »

Yes,

Not to sure with the 12ht but the 13bt uses a vacuum solinoid to shut off the air intake to kill the engine. Fix your vacuum leak andyour stoppong issues will most likely disappear.


Good luck
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest