Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

BT50 Diff Breathers

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 182
Joined: Tue Sep 04, 2007 7:09 pm
Location: Blue Mountains

BT50 Diff Breathers

Post by StarkRavingSimmo »

Hey, I've got a mate whos just bought a BT50. Hes thinking about fitting some diff breathers. Anyone done this before on a BT50? The front diff is not exactly easy to get to
Top
Posts: 561
Joined: Tue Jan 04, 2005 2:25 pm
Location: Melbourne

Post by Cossie »

Getting to it is the least of your problems- at least one of the diffs has a non-standard thread for the breather fitting. We trawled round all the hose places (Enzed, pirtek etc) and no-one could match it. It's apparently a thread thats usually only used for bolts, so finding a hose type fitting is very hard.
The hardest thing about owning a jeep is telling your parents you're g a y!!
Top
Posts: 182
Joined: Tue Sep 04, 2007 7:09 pm
Location: Blue Mountains

Post by StarkRavingSimmo »

heh apparantly that wont be a problem, do you know what the thread is? We'll get one machined up.
Top
Posts: 317
Joined: Thu Jul 19, 2007 11:03 pm
Location: Brisbane

Post by Danzo »

StarkRavingSimmo wrote:heh apparantly that wont be a problem, do you know what the thread is? We'll get one machined up.
if he owns the car already then cant he get the thread matched?
I hate going to weddings because all the grandma's used to poke me in the ribs saying you're next, you're next. They've stopped doing it since I started doing it to them at funerals.
Top
Posts: 19
Joined: Sun Oct 25, 2009 6:04 am
Location: Morayfield

Contact:
Contact spottydog.

Post by spottydog. »

I have fitted Diff Breather extensions to my BT-50.
I got them from Billet Race Craft http://www.billetracecraft.com.au/
The kit comes with the correct adapters.
You can order over the phone (08 8532-4977) using a credit card, or send them an email at sales@billetracecraft.com.au
The only trouble I had was getting at the front diff breather.
If you use a ratchet ring spanner you will find it a lot easier.
Mazda BT-50 | Larger Intercooler | Safari Snorkel | OME Suspension | Cruise Ctrl | Roller Drawers | ARB Canopy | ARB Air Comp | CTEK Dual Batt | Sahara Bar
Website Design
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 133 guests