starting a build up after bending all the arms on my coily
was thinking 60 series diffs with 2 in body lift and 3in spring lift and 95in wb
tri 3 link rear and radius arms on the front like the rocky road ones but with a pin at the chassis end like a patrol and about 42in long
was wondering if any one had any pics of steering setup, was thinking 60 psbox
thanks in advance
if anyone has some advice on this build up let me know
was thinking maybe 33's for now then maybe 35-37
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
fat coily
after talking to some people i am now thinking 96 in wb
60 series diffs
60 series ps box
tri 4link rear
3 link panhard rod front
front diff 10mm forward
rear diff 300 mm back
hopefuly 35 or biger if i can get them passed
2in body
2in springs prob coil over springs by them self, need realy small springs for front to clear ps box
just wanting to know wat people think
does 3 link handel any good on road
does anyone have any ideas wat i should use for the rod ends, was thinking patrol super flex bushers because rod ends cant be pased
60 series diffs
60 series ps box
tri 4link rear
3 link panhard rod front
front diff 10mm forward
rear diff 300 mm back
hopefuly 35 or biger if i can get them passed
2in body
2in springs prob coil over springs by them self, need realy small springs for front to clear ps box
just wanting to know wat people think
does 3 link handel any good on road
does anyone have any ideas wat i should use for the rod ends, was thinking patrol super flex bushers because rod ends cant be pased
1990 lwb vit
4 in lift
winch,lockers,gears, 31's
4 in lift
winch,lockers,gears, 31's
Who is online
Users browsing this forum: No registered users and 2 guests