Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Tricks for removing needle bearing from tcase output?

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 24
Joined: Tue Jan 22, 2008 9:14 am
Location: Christchurch NZ

Tricks for removing needle bearing from tcase output?

Post by HedgeBoar »

Just stripping down my transfer case to put some 6.5:1 gears in...

not having much luck getting the small needle bearing out of the front end of the output shaft, does anyone know any tricks to try with this?

Cheers.
Top
Posts: 2600
Joined: Thu Sep 27, 2007 2:40 pm
Location: Townsville

Post by GRPABT1 »

Hydraulic press? Bearing puller?
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
Top
Posts: 801
Joined: Fri Sep 23, 2005 12:56 pm
Location: Darwin N.T

Post by MUD-PIGSIERRA »

How too

http://www.izook.com/tech/samurai/drive ... /twins.htm
..wrench, wheel, wreck repeat..

check out the action @ http://www.darwin4x4.net
Top
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

I used bent tipped circlip pliers.
Top
Posts: 1415
Joined: Sat Oct 15, 2005 2:09 pm
Location: Trying to hide the bus keys!

Post by v6hilux »

Grease and displacement, you work it out!
I'm the sharpest tool in the shed!
Top
Posts: 24
Joined: Tue Jan 22, 2008 9:14 am
Location: Christchurch NZ

Post by HedgeBoar »

yeah tried the circlip pliers and the grease method, along with a bit if slide hammer action..... with no luck. seems to be very stuck. Might just have to bite the bullet and take it to someone with the correct puller i guess...

Cheers.
Top
Posts: 24
Joined: Tue Jan 22, 2008 9:14 am
Location: Christchurch NZ

Post by HedgeBoar »

Got it in the end with another attempt at the grease/punch trick :D
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 1 guest