Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

will 35" fit with a 3" lift

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 9
Joined: Tue Mar 11, 2008 9:42 am
Location: brisbane

will 35" fit with a 3" lift

Post by Jason V »

Hey, i was just wondering if 35's will fit on a 80 series with a 3" lift kit?
Top
Posts: 340
Joined: Tue Aug 21, 2007 12:27 pm
Location: Thornton

Post by princess T »

sure will
COALFIELDS FAMILY 4X4 CLUB
Top
Posts: 178
Joined: Fri May 05, 2006 6:57 pm
Location: SE melb

Post by Coogs »

put a set of 50mm bumpstop spacers in and you can run 36in simex :armsup: :armsup:
95 80s gxl 4.5 pet/gas (4 play)
85 MWB73 350chev pet/gas (4 project)
98 TJ Wrangler (4 Wife)
Top
Posts: 288
Joined: Sat Mar 18, 2006 4:30 pm
Location: Darwin

Post by jsttry »

Have 35x10.5x16 Simex and also test fitted 35x12.5x15 MTR's with a 3" lift, both fit without an issue
Top
Posts: 9
Joined: Tue Mar 11, 2008 9:42 am
Location: brisbane

Post by Jason V »

Awesome im looking at putting on MTR's aswell. thanks heaps for the help
Top
Posts: 79
Joined: Mon Dec 04, 2006 5:53 am
Location: Middlemount, QLD

Post by diby_2000 »

Do you still have mudflaps etc? I was told they would grab.
Top
Posts: 340
Joined: Tue Aug 21, 2007 12:27 pm
Location: Thornton

Post by princess T »

diby_2000 wrote:Do you still have mudflaps etc? I was told they would grab.
in our 80 they dont
COALFIELDS FAMILY 4X4 CLUB
Top
Posts: 9
Joined: Tue Mar 11, 2008 9:42 am
Location: brisbane

Post by Jason V »

Yeah i still have the mud flaps on
Top
Posts: 178
Joined: Fri May 05, 2006 6:57 pm
Location: SE melb

Post by Coogs »

I had to trim a tiny piece off the top edge of the mud flap so it wouldn't catch at full articulation in reverse when i ran 36x12.5x16 simex
but then i switched to 35x10.5x16 silverstone extremes and nothing touches :armsup:
95 80s gxl 4.5 pet/gas (4 play)
85 MWB73 350chev pet/gas (4 project)
98 TJ Wrangler (4 Wife)
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests