Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

How much does a dressed TD42 weigh?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 569
Joined: Sun Jan 11, 2004 11:36 am
Location: Sunshine Coast QLD

How much does a dressed TD42 weigh?

Post by Mark2 »

I have to remove a TD42 soon. I have a Supercheap engine crane and I suspect that the only way to get enough height to clear the radiator crossmember will be to have the jib fully extended - where the load rating drops to 500kg (hopefully). Will this be enough capacity? enough height??
Top
Posts: 286
Joined: Tue May 11, 2004 8:48 pm
Location: Toowoomba

Post by patrol man »

A TD motor weight is about 300kg, the crane at 500kg should be heaps, but the engine stands don't like it, I have mine braced with two bits of 4"x2" wood to support the front of the motor, or you could rest it on an old tyre.
good luck, Phill
Living the dream on the hill that floods
Top
Posts: 527
Joined: Fri Apr 23, 2004 5:43 am
Location: Auckland, NZ

Post by GQ TROL »

Engine with accessories in place weighs 352kg.
Top
Posts: 569
Joined: Sun Jan 11, 2004 11:36 am
Location: Sunshine Coast QLD

Post by Mark2 »

Thanks guys, sounds like I'll have a bit of safety margin - nice to have with chinese lifting gear.............
Top
Posts: 1
Joined: Sun May 20, 2007 12:33 pm

Post by True Blue »

G'day mate,

One way to get a bit of room to lift the engine out is to deflate your front tyres.Or take them off and use axle stands.It helped me any way good luck.
Top
Posts: 1040
Joined: Fri Jun 29, 2007 7:57 pm
Location: yatala, halfway between brisbane and GC

Post by love ke70 »

hey, great info so far, can i also ask, what does the gearbox weigh? and what about the transfer case?

cheers, andrew
97 GQ patrol coilcab. TD42, safari turbo kit with fiddled turbo, D-GAS kit. dyno results to come...
4inch lift, king springs, efs and procomp shocks
315/70R16 cooper ST's
found fuel economy...
Top
Posts: 1232
Joined: Sun Feb 29, 2004 11:37 pm
Location: Brisvagas

Post by Bad JuJu »

A friend once told me tjhat a GU T-case and gear box weighs ........ Fcuk this thing is heavy get it off me!!

He was right, I can lift a VN v6 commo engine minus flywheel by hand ... this was more than that - I struggled!!
Posting quality not quantity!

Wanted: Stock HiLux Front Leaf Springs
Top
Posts: 107
Joined: Sun Apr 09, 2006 10:03 am
Location: europe

Post by Rampage »

gear box and transfere took 4 blocks to ift off a gearbox jack and onto the ground when i did my clutch! so i would assum around the 150-200kg mark!
Top
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

Rampage wrote:gear box and transfere took 4 blocks to ift off a gearbox jack and onto the ground when i did my clutch! so i would assum around the 150-200kg mark!
That would be well down the low end of what I'd guess.
This is not legal advice.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 89 guests