Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

centre mounting winches

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 358
Joined: Mon Apr 16, 2007 10:35 pm
Location: Brisbane QLD

centre mounting winches

Post by [gubeaut] »

just curious to know how much work is involved in center mounting a low mount .not so much the mounting of the winch itself but running the cable.it's for a gu ute if that helps.even info on people who do it in bris
4INCH EFS LIFT
SUPRERIOR ARMS
TWIN LOCKERS
11000LB tigerz11 WINCH
36 swampers OFF ROAD
3inch S/S/S exhaust
Top
Posts: 2601
Joined: Tue Jul 13, 2004 8:02 pm
Location: warner, brisbane

Post by chunderlicious »

pretty easy. few eyeets or 150mm runs of tube from whinch to front of car
turbos are nice but i'd rather be blown
Top
Posts: 6221
Joined: Tue May 31, 2005 12:51 pm
Location: Sydney

Post by v840 »

chunderlicious wrote:pretty easy. few eyeets or 150mm runs of tube from whinch to front of car
Does doing it this way abrade the cable?
|^^^^^^^^^^^^^^| ||
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
Top
Posts: 1285
Joined: Thu Jan 15, 2004 8:22 pm
Location: gold coast

Post by uninformed »

most of the center mounted winches i have seen, face the rear, go to a pulley block at the rear of the vehicle and then around and to thje front.

this way you can winch rear or foward...
all rear winching is a double line pull....

cheers, serg
Top
Posts: 2601
Joined: Tue Jul 13, 2004 8:02 pm
Location: warner, brisbane

Post by chunderlicious »

you flange the tubing so it has no sharp edges. and incorporate a bend in the tube if the cable needs to change direction.

best setup i have seen was kym boltons, if you ever get a chance check his setup out.

at winch challenge the guy i was naving for used a piece of tube from front to back in one solid piece and when the cable broke that was it for the SS we had to finish there and retrieve the rope with a bit of that yellow shit sparkies use to pull cable through. not much fun if your doing hard winches on every SS with an old rope.
turbos are nice but i'd rather be blown
Top
Posts: 358
Joined: Mon Apr 16, 2007 10:35 pm
Location: Brisbane QLD

Post by [gubeaut] »

cheers guys thanks for the replies and check out boltens if i can
4INCH EFS LIFT
SUPRERIOR ARMS
TWIN LOCKERS
11000LB tigerz11 WINCH
36 swampers OFF ROAD
3inch S/S/S exhaust
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests