Currently have Kings coils with a 50 mm lift and Rancho 9000 shocks but this combination results in a very harsh ride and the suspension is very stiff overall. What do you blokes reckon is the best spring and shock combination for a Defender to give best allround performance.
Any comments would be appreciated
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Defender Suspension
Moderator: Micka
Sounds like the springs are too heavy - common problem where people recommend a heavier spring if you want lift - instead of just a taller spring of the same spring rate.
The ranchos are adjustable and I think are pretty soft on their soft setting so might not be the problem
Have a look at this page and see whats available
http://members.shaw.ca/jbarge/springinfo.html
then get some softer, taller springs. Talking to someone who knows their stuff is worth it, too soft and the truck will be all over the road.
The ranchos are adjustable and I think are pretty soft on their soft setting so might not be the problem
Have a look at this page and see whats available
http://members.shaw.ca/jbarge/springinfo.html
then get some softer, taller springs. Talking to someone who knows their stuff is worth it, too soft and the truck will be all over the road.
ct
i like longer standard springs (kings) up front with toyota 80 series konis on the softest setting ( bar, no winch)
on the rear the spring depends on the weight.
i will be trying the monroe 14" truch shocks shortly.
the front is comfortable without being to soft and it does flex with sam's slotted bushes.
i don't like the bush alignment on the rear shocks, top or bottom.
search and have a look at rangie spares +30% articulation kit.
the principles are good and you can make most of it yourself.
modman
on the rear the spring depends on the weight.
i will be trying the monroe 14" truch shocks shortly.
the front is comfortable without being to soft and it does flex with sam's slotted bushes.
i don't like the bush alignment on the rear shocks, top or bottom.
search and have a look at rangie spares +30% articulation kit.
the principles are good and you can make most of it yourself.
modman
Who is online
Users browsing this forum: No registered users and 20 guests