vacume hoses were do they go

[naboo]

hi everyone i have a 83 rangie with a 4.4 on gas could any one help me with where the vacume lines and breather hosue go (mainly the ones from the rocker covers- brack booster-inlet manifold-and one goes in to the air fillter) FOR EXAMPLE, right rocer cover to air filter , left goes to inlet manifold and carbie to brack booster does this sound right..

[Loanrangie]

hi everyone i have a 83 rangie with a 4.4 on gas could any one help me with where the vacume lines and breather hosue go (mainly the ones from the rocker covers- brack booster-inlet manifold-and one goes in to the air fillter) FOR EXAMPLE, right rocer cover to air filter , left goes to inlet manifold and carbie to brack booster does this sound right..

Brake booster comes off the inlet manifold not a carb, both RC pipes go to the carby (factory twin strommies) i guess you are using the stock 4.4 2brl stromberg carb ? You may have to drill/tap a new port to connect the vac hose to if there is none available, for the RC i used a later 3.5 flame trap and connected the hose to the inlet at the base of the carb or filter housing if you can.

[naboo]

thanks ill give that a go i should have been more detailed it has i holly 350, I am asking becouse the air filtter is geting oil on it .one of the hoses is running straight to the bottom of the air filter.