Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Gti Exghust into a sierra which one?

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 79
Joined: Tue Jul 18, 2006 7:27 pm
Location: NSW

Gti Exghust into a sierra which one?

Post by JacZook »

Hi Guys

I have a zook with a Gti engine but with stock manifold, I am after a set of extractors, do 1.6lt efi extractors fit or 1.3 carb extractors, or do I need them made.

thanks ahead
jaczook
Top
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Contact:
Contact Gwagensteve

Post by Gwagensteve »

GTI head should be round port and might match 16V Vitara/Baleno, but I don't know this for sure. 99% they aren't going to be the same as carby.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Top
User avatar
cj
Posts: 1913
Joined: Tue Jul 01, 2003 10:30 pm
Location: Melbourne

Post by cj »

This shows you the variuos exhaust port shapes and dimensions.

http://www.rage.co.nz/flanges/suzuki.pdf
[quote="4WD Stuff"]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
Top
Posts: 2600
Joined: Thu Sep 27, 2007 2:40 pm
Location: Townsville

Post by GRPABT1 »

I bought a geanie header to suit a 1.3 sierra and had the GTi flange welded on which any exhaust shop who sells pace maker gear could do as they sell the GTi flange. Works well too.
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
Top
Posts: 2600
Joined: Thu Sep 27, 2007 2:40 pm
Location: Townsville

Post by GRPABT1 »

Oh and btw besides port shape they are all different bolt pattern, sierra extractors have virtually the same pipe position though which suits the GTi flange well.
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 1 guest