Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
ats4x4dotcom wrote:
Why would you buy an L76 when they only came in one model here?
Because ballarat holden have them for $3000 for 300kw.....including computer
6 speed, clutch and the rest of the shiz for a further $3000.....
researching this to put into a "Z"
i wouldnt go the big block, if your stuck on a chev ls2 or l76 both cheap brand new reliable motors, weight isnt a huge issue but to go alloy heads and intake your looking at 4-5 grand for some decent complete edelbrocks or something,(a complete l76 with all acc is around 6) but if i could do my conversion again it would be a xr6 turbo motor and c4, reliable light small and 300kw at the wheels with over 100nm of torque at the wheels no worries, i got a 304 in mine at the moment and wouldnt want a engine that is phisically much bigger,
so i building a forged roller cammed 355 that should do 470-500hp
Thanks for the replies people. I've got the motor, thats not an issue, but am still tossing it up a bit, am in no hurry anyway.
As for moving the motor back, thats not an option. I want to be able to run stock drive shafts, so if I kill one I can find another stocker and bang it in no matter where we are, I've seen someone brought undone by this before.
Have done a bit of research along with the help you've all given me and to be honest I like the wank factor of the big block, along with that this motor has had a bit of work done to it already so it goes pretty hard.
One question though, whats peoples thoughts on the stock 5 speed manual handling the big block? and what clutch to go with it?
Hey Beretta! FYI I finally got my auto serviced by J&J Performance after speaking with Steve from BMS Autos. He said that the box itself can take up to 1300hp!! - the converter is the only weak link.....so I'm guessing that your old 5 speed should definitely be able to handle the power. But if your going to all the effort of the conversion, IMO I'd go the auto option even though that involves even more work.
H( * )( * )NZ loves B( * )( * )BIES
if a fat lady falls in the forest do the trees laugh?
[quote="RUFF"]although i didnt mean to, i squealed like a girl :armsup:[/quote]
Clutch will be easy. depends on what flywheel is used from the conversion kit.