fitted a 3" lift to my gq and after have found the front sits about an inch lower than the back is there anything i can do to try even it out like a coil spacer ?
cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
suspention height issue
Moderators: toaddog, TWISTY, V8Patrol, Moderators
suspention height issue
95 GQ td42
3"lift 33 claws
covered in mud
3"lift 33 claws
covered in mud
This happens a lot. Especially if you haven't specified to the retailer the accessories that you have fitted. If you just ask for a 3" lift they will give you a standard rate spring which will sit lower than advertised if you have a bull bar, whinch etc fitted. You can get coil spacers if you want but you'll find that when you load the truck up to go camping or travelling that it will settle down. Which is what it is designed to do. 
http://www.outerlimits4x4.com/viewtopic ... 6&t=231346j-top paj wrote:gayer than jizz on a beard
Who is online
Users browsing this forum: No registered users and 2 guests