Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Removing front propeller shaft.

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 3
Joined: Thu Mar 29, 2007 11:36 am

Removing front propeller shaft.

Post by metamorphesis »

hello people..hope someone can help me with this...i have a 80 series constant 4wd model and was wondering if i could simply remove front propeller/drive shaft to hopefully improve fuel consumption. has anyone tried this or know if it is possible?
thanks
Top
Posts: 2590
Joined: Tue Jan 04, 2005 11:33 am
Location: Brisbane

Post by Chucky »

If you did that the car would move at all unless you locked it in hi 4.

There really is not benifit unless you install manual locking hubs to stop the front diff from turning and the transfer would also still be trying to turn the front shaft.

To do the job properly you need the manual locking hubs on the front and a part time kit installed in the transfer, marks adaptors make these.
My Cruiser is Environmentally Friendly.

It runs on recycled Dinosaurs.
Top
Posts: 3740
Joined: Sat May 26, 2007 5:04 pm
Location: Licking a window near you

Post by 80's_delirious »

you can remove the front prop shaft and just engage the centre diff lock button.
It will make no difference to the fuel economy and IMO the 80s drive better in full time 4x4.
RN wrote:pussy is out, its the log for me... Thank you Jesus.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests