Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
1.3 L electronic dissy in 1L
1.3 L electronic dissy in 1L
Does 1.3 L electronic dissy fit in 1L f10a. I searched, Thanks Trev
Yes, I have done it, but I think I stuffed up where I pulled the vacuum from. I have learned that depending on where the vacuum comes from (in relation to the carby) some strange things can happen.
Idle was much much better but I couldn't ever seem to get enough advance in- It would bog until it was really revving.
It's a bolt in though.
Steve.
Idle was much much better but I couldn't ever seem to get enough advance in- It would bog until it was really revving.
It's a bolt in though.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Who is online
Users browsing this forum: No registered users and 1 guest