Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

tb42e Turbo size and inyectors

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 10
Joined: Thu Feb 07, 2008 12:27 am
Location: chile

tb42e Turbo size and inyectors

Post by y60chile »

Hello!

I was doing a stroker for my tb42, but its as expensive as turbocharging, so im going to use turbo :)

The motor is now balanced, crower stage 2 camshaft, springs, etc and... the question.

Turbo:

XS power: i have read in many posts that these turbos usually get destroyed.
Masterpower: seems to be fine, but they spool slower than a garret.
Garret: ideal, but a little expensive :(

Size:
t3/t4
Gt28
etc

Ballbearing or not ?

I wannt to rev the motor to 6.000 or maybe 6500 (i think with the setup will not be a trouble), but i wannt to start blowing at 2.000rpm.
Any recomendation?

What about the inyectors size?
550?

Expecting no more than 8-10psi. Maybe 200KW or maybe a little more. :)

Ahh, only petrol...we wave no gas here in chile.

Any help would be appreciatte.

Thanks
Chris
Top
Posts: 1918
Joined: Mon Sep 26, 2005 6:03 pm
Location: Victoria

Post by Jimbo »

Where abouts did you get your motor done? Any idea on cost?? Looking at going down the same path later on. How much better does it go now?
GQII Patrol YAY!!
Top
Posts: 2601
Joined: Tue Jul 13, 2004 8:02 pm
Location: warner, brisbane

Post by chunderlicious »

those are small turbos.

you need a GT35.42r or a to4z i beieve it is.

these turbos give awsome power all through the revs.
turbos are nice but i'd rather be blown
Top
Posts: 116
Joined: Wed Sep 20, 2006 8:03 pm
Location: Rockhampton QLD

Post by ELF_83 »

deffinatly don't want gt28's they are the turbo's that i was using but i had two of them hanging off the side of my head that setup worked great for me. XR6 turbo probably a little to laggy but depends on how you drive it but a GT35/40 with a .8 ex is the go. If the Garret is scaring you for cost then stay away from turbonetics new range lots better than garrets but you pay for them trust me.
GQ SWB
Twin Turbo
F & R Air lockers
Roll Cage
Loose Nut Behind the Wheel

LOOKING FOR SPONSORS???
mum can't afford it anymore! hahaha
Top
Posts: 722
Joined: Sat Nov 09, 2002 9:31 pm
Location: Berwick, Melbourne

Post by awill4x4 »

ELF_83 wrote: If the Garret is scaring you for cost then stay away from turbonetics new range lots better than garrets but you pay for them trust me.
Yep, Turbonetics new GTK range, also known around the traps as GT Killers as a sly dig to Garret.
Regards Andrew.
We are Tig welders, gravity doesn't worry us.
[img]http://www.studmonkeyracing.com/forums/smilies/weld.gif[/img]
Top
Posts: 4275
Joined: Fri Nov 22, 2002 6:41 pm
Location: Western Australia

Post by Hoonz »

200kw hahaha you'll drive it like that for a week and you'll be like ... "NEED MORE BOOST!!!!"
H( * )( * )NZ loves B( * )( * )BIES
if a fat lady falls in the forest do the trees laugh?
[quote="RUFF"]although i didnt mean to, i squealed like a girl :armsup:[/quote]
Top
Posts: 10
Joined: Thu Feb 07, 2008 12:27 am
Location: chile

Post by y60chile »

Jimbo wrote:Where abouts did you get your motor done? Any idea on cost?? Looking at going down the same path later on. How much better does it go now?
Hello!

Well, the cost is about 1500US (a friend of mine work at nissan and i can get the parts very cheap) , im in chile, so everything cost the double :(
That includes:

intake,plenum (mine is carburated)
inyectors
engine rebuild (not the pistons, they are fine)
gaskets
clutch
sensors
"mariposa" from a vh45 (the thing who let the air flow, where the tps is) dont know the name in english.
couple of sensors
new bolts
new oil pump

motor balanced, engine cleanup (bock and head). (400US)

The crower cam is not included. :) (270US)

the ecu will be a megasquirt II (1000US installed, that includes the harness and related stuff)

About 3.000US everything

everything brand new.

need the turbo, wastegate, intercooler and blow off. (dont know for now)
thats expensive!!!

Maybe is wat not worth the engine rebuild, cause when we dismanteled the engine it was almost new (300.000km), but im very exquisit. (i like new engines :) )

greets
chris
Top
Posts: 10
Joined: Thu Feb 07, 2008 12:27 am
Location: chile

Post by y60chile »

chunderlicious wrote:those are small turbos.

you need a GT35.42r or a to4z i beieve it is.

these turbos give awsome power all through the revs.
Hi!

i have googled more info, and i believe you are completely right.
men...those thing cost almost 2.000US here in chile.
Thnaks for the tip!

Chris
Top
Posts: 10
Joined: Thu Feb 07, 2008 12:27 am
Location: chile

Post by y60chile »

ELF_83 wrote:deffinatly don't want gt28's they are the turbo's that i was using but i had two of them hanging off the side of my head that setup worked great for me. XR6 turbo probably a little to laggy but depends on how you drive it but a GT35/40 with a .8 ex is the go. If the Garret is scaring you for cost then stay away from turbonetics new range lots better than garrets but you pay for them trust me.
i thing im going for a garret, but it cost 2.000US here.

Thanks
Chris
Top
Posts: 10
Joined: Thu Feb 07, 2008 12:27 am
Location: chile

Post by y60chile »

awill4x4 wrote:
ELF_83 wrote: If the Garret is scaring you for cost then stay away from turbonetics new range lots better than garrets but you pay for them trust me.
Yep, Turbonetics new GTK range, also known around the traps as GT Killers as a sly dig to Garret.
Regards Andrew.
cant get turbonetics here in chile... i will have to import it, so the price will become higher... mhmmhmhm men, im to far away from the civilization!

Thanks
Chris
Top
Posts: 10
Joined: Thu Feb 07, 2008 12:27 am
Location: chile

Post by y60chile »

Hoonz wrote:200kw hahaha you'll drive it like that for a week and you'll be like ... "NEED MORE BOOST!!!!"
i know, i know.... everybody tell me the same thing, but i have to start with something... :) .
Cant get forged pistons...to expensive (i think).

How much boost you think can i run safe?

Here is a video from a trip to the north...

http://www.vimeo.com/817291

http://www.vimeo.com/820288

the sanddune doesnt seem to high, but believe me.... its PURE HEAVY METAL!!!


Many patrols, suzuki and wranglers with superchangers, turbos, blah blah.



Enjoy.


Chris
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 5 guests