Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Unusual squeak

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Post Reply
Posts: 315
Joined: Thu Jul 29, 2004 6:53 am
Location: South Australia

Unusual squeak

Post by cookie monster »

Over the last couple of weeks the 2.8td has developed an unusual squeak.
Happens in 3rd or 4th gear at approx 2000rpm when engine is under load(going up an incline mainly). Doesnt happen on the flat at the same revs/gears.
I have replaced the fan belts(although the alternater pulley is a little worn) a month or so ago and the tension is still good on them.

Squeak seams to be coming from the rear of the engine(as it also happens when starting or stopping the engine) and is quite pronounced from the drivers seat.

Im thinking it could be either alternator bearings(plan to remove belts and try) or engine mount(due to squeak happening when vibration evident). It doesnt do it when stationary and reving engine and the engine doesnt appear to have excessive movement.

Checked the suspension over when the belts were changed(as i replaced the wheel bearings) and every thing seamed ok apart from drivers lower ball joint, which showed some play.

Anybody else got any other suggestions?

cookie monster
99 GU Patrol Wagon 4.2td
Posts: 31
Joined: Thu Aug 05, 2004 6:14 pm

Post by greybeard »

not the beginning of the speedo cable squeaking is it?
it took me a couple of months of gradually getting a louder squeak before it was obvious it was the speedo cable. the speedo had an intermittant shake in it.
while driving and you can hear the squeak, throw the clutch and see if the squeak is still there. ie if it's engine/drive train related or not.

ps. still waiting on the speedo cable to come from japan! :cry:
Posts: 18
Joined: Wed Jul 21, 2004 9:34 pm
Location: Adelaide

Post by TREVORC »

neil this may be silly but i had a noise like that try clicking you free wheeling hubs in with out engaging 4wd mine was sqeeky bearing in the outer freewheeling hub

trevor
NL 3.5 5speed GLS 2inch lift 4 170 lightforce lights 2 1/2 inch exhaust with extractors & still more to come
Posts: 315
Joined: Thu Jul 29, 2004 6:53 am
Location: South Australia

Post by cookie monster »

as soon as i dip the clutch(keeping throttle the same) the squeak goes(even pressing clutch a little bit, so that it slips).
will have a look at the speedo tomorrow.
cookie monster
99 GU Patrol Wagon 4.2td
Posts: 315
Joined: Thu Jul 29, 2004 6:53 am
Location: South Australia

Post by cookie monster »

TREVORC wrote:neil this may be silly but i had a noise like that try clicking you free wheeling hubs in with out engaging 4wd mine was sqeeky bearing in the outer freewheeling hub

trevor
thanks trev, will try tomorrow

neil
99 GU Patrol Wagon 4.2td
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest