Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

led light problems.

For all things Electrical.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 125
Joined: Sun Jan 29, 2006 11:10 am
Location: Brisbane

Contact:
Contact blurredvision

led light problems.

Post by blurredvision »

Has any one had these tailights




How do you get the lights out of the frame without breaking it?
Image
http://www.dirtcomp.com.au/
Top
Posts: 73
Joined: Mon Jan 28, 2008 9:43 am
Location: Newcastle

Post by 4runner_boy »

Yeh mate very tricky, Gently slide a flat blade screwdriver into the middle of the top(above the name) a little bit whilst pushing the back of the light forward.

the LED unit itself has tabs on the top and bottom,I have had a good run with these lights,tough as nails and far cheaper than the big name stuff
Top
Posts: 125
Joined: Sun Jan 29, 2006 11:10 am
Location: Brisbane

Contact:
Contact blurredvision

Post by blurredvision »

Finally got round to removing them, thanks for the tip.
Definitely a tight fit, but i guess thats is a good thing that they wont rattle around.
The quality of them seems to be very good.
http://www.dirtcomp.com.au/
Top
Posts: 1
Joined: Mon Sep 24, 2007 6:05 pm
Location: newcastle

Post by titsout4x4 »

hey mate i had these lights on me old truck and there is two little clips on the sides of the lights u need two little flat blade screwdrivers and u just pry the lights out hope this is helpful
Top
Post Reply

Return to “Auto Electrical”

Who is online

Users browsing this forum: No registered users and 1 guest