Guys about to go beadlocks with my 35x10.5 simexes.
The beadlocks are going on a 15x8 rim and since i have heard that by adding the beadlock it adds approx a inch to width wtll the 10.5 still be okay on these?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
simex 35x10.5 beadlocks question
Moderators: toaddog, TWISTY, V8Patrol, Moderators
simex 35x10.5 beadlocks question
www.mudrhino.com.au
i run 35x10.5x15 simex's on 15x8 rims with mechanical bedalocks (effectively 9" wide to tyre mounting surface on beadlock side.
No worries whatsoever, even ran 4psi when i had the hilux in comps without drama.
Fitting the same tyre on a 15x10 rim however was another matter... the tyre place had dramas trying to seat the bead. i use it for a spare only at about 30psi (never actually used it) it looks like the wierdest simex you ever saw due to its wideness!!!
No worries whatsoever, even ran 4psi when i had the hilux in comps without drama.
Fitting the same tyre on a 15x10 rim however was another matter... the tyre place had dramas trying to seat the bead. i use it for a spare only at about 30psi (never actually used it) it looks like the wierdest simex you ever saw due to its wideness!!!
GU 4.2 TD Garrett BB Hi-flow, M8274 + Bells & Whistles with plenty of fruit still on the list!
[b][color=red]\ m / ( > . < ) \ m /[/color][/b]
[b][color=red]\ m / ( > . < ) \ m /[/color][/b]
Who is online
Users browsing this forum: No registered users and 4 guests