Indicator fluid

Post by **mickrangie** » Sun Dec 14, 2003 5:19 pm

My indicator fluid is low and they no longer flash....

Do I have to use Land Rover ‘flasher can’ to get them going again or is there another brand that will do the job?

BTW it’s a 93’

Mick

Post by **LowRanger** » Sun Dec 14, 2003 5:23 pm

I would just use a bottle of FLASH LUBE :lol:

Post by **bazzle** » Sun Dec 14, 2003 6:08 pm

I use plain old blinker fluid but suprisingly enough, you can use
one of those 'personal' lubricants like
Astroglide or KY since they have
what it takes to stand up to the intense
heat and pressure found in a tight
flasher.

Bazzle :roll:

Post by **rick130** » Sun Dec 14, 2003 6:43 pm

I always use a fully synthetic blinker fluid as you can significantly extend the drain interval, and you get far less evaporation at elevated temperatures around the high temperature filament/ glass interface, again extending the life of the fluid.

Post by **mickrangie** » Sun Dec 14, 2003 7:09 pm

OK jokes aside does it rquire a LR type relay flasher can? :oops:

Post by **bazzle** » Sun Dec 14, 2003 7:48 pm

NO, you can use a generic flasher if you hold it in with OEM duct tape. :cool:

Bazzle

Post by **mickrangie** » Sun Dec 14, 2003 8:27 pm

sweet fanks mate..

Does anyone know where the filler cap for the rhr indercator is?

Outer Limits 4x4 Board

Indicator fluid

Indicator fluid

Indicator fluid

Who is online