Hey guys just wondering if there is a way to get around the draglink fouling on the springs without having to buy that ever so expensive high steer kit.
Did a quick search in the bible and saw the zukicrawlers site using Mercedes arms but not sure if something similar can be used here in Oz???
Any help would be great as i really need to get this project underway and saving up $1000 is taking too long, LOL!!!
Stu.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
spoa questions!
You can use the merc arms (do a search its on here somewhere) but seriously dude, just save up for the high steer. Put it on the credit card, get a small personal loan etc. its not something you want to take the chance on hey.
|^^^^^^^^^^^^^^| ||
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
X2 hogging out holes and steering off a caliper bracket is dumb and hack, regardless of how close the merc arm is from looking right, or how many guys in the states (or here) have done it.
Save the money and get your car right.
Steve.
Save the money and get your car right.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Search is also your friend... 
http://www.outerlimits4x4.com/viewtopic ... ight=steer
Same thread as above but this was my original drag link dodgy asssss
http://www.outerlimits4x4.com/viewtopic ... ight=steer
Same thread as above but this was my original drag link dodgy asssss
..wrench, wheel, wreck repeat..
check out the action @ http://www.darwin4x4.net
check out the action @ http://www.darwin4x4.net
Putting the kit on is fairly easy if you have the basic tools and have done general mechanical fixes before such as wheel bearings and the likes. You will need a hammer too to get the tie rod of the old knuckle make sure you get it of first before taking the whole knuckle of as its alot easier when its all bolted up to him it a few times
I needed to pull the whole assembly of to get on the new knuckle obviously...
The rubber seel was good and wheel bearings were all okay as well as having no water or mud in there so I just put in new Kingpin bearings with the new knuckle and put it all back together, it doesn't seem to need a wheel alignment but I will get it out for one just in case.
I needed to pull the whole assembly of to get on the new knuckle obviously...
The rubber seel was good and wheel bearings were all okay as well as having no water or mud in there so I just put in new Kingpin bearings with the new knuckle and put it all back together, it doesn't seem to need a wheel alignment but I will get it out for one just in case.
..wrench, wheel, wreck repeat..
check out the action @ http://www.darwin4x4.net
check out the action @ http://www.darwin4x4.net
Unfortunatly a dropped pitmanarm wont be enough.
This problem was a factor in me goin toys + bent diff twisted axles etc..
The highsteer is expensive but not really any other option.
There are ALOT of bad comments about z bars but I ran one for years without probs and Ive even seen them xrayed and engineered but things may have changed now.
Nik
This problem was a factor in me goin toys + bent diff twisted axles etc..
The highsteer is expensive but not really any other option.
There are ALOT of bad comments about z bars but I ran one for years without probs and Ive even seen them xrayed and engineered but things may have changed now.
Nik
i was not going to post here, but a couple of things have stuck in my head, (1) being that bolting steering to brake caliper bracket is dumb and hack, has anyone ever seen a caliper bracket brake off. (2) being that there are numerous aftermarket manufacturers bolting there histeer and x over kits to the caliper bracket, is it still dumb and hack? i will be convinced by a single photo and build specs if anyone has one, but till then i'll go with what i know.
jason
DISCLAIMER- i do not support any modification that lowers the safety of any vehicle or effects its roadworthiness or do i encourage any modification that has not been assessed buy a certified automotive engineer
jason
DISCLAIMER- i do not support any modification that lowers the safety of any vehicle or effects its roadworthiness or do i encourage any modification that has not been assessed buy a certified automotive engineer
WANTED: swb vitara rear seat. the 3 seater bench type
for sale: wt diffs, snake hi steer, maruti 4.1 wt centres,
for sale: wt diffs, snake hi steer, maruti 4.1 wt centres,
mr green wrote:i was not going to post here, but a couple of things have stuck in my head, (1) being that bolting steering to brake caliper bracket is dumb and hack, has anyone ever seen a caliper bracket brake off. (2) being that there are numerous aftermarket manufacturers bolting there histeer and x over kits to the caliper bracket, is it still dumb and hack? i will be convinced by a single photo and build specs if anyone has one, but till then i'll go with what i know.
jason
DISCLAIMER- i do not support any modification that lowers the safety of any vehicle or effects its roadworthiness or do i encourage any modification that has not been assessed buy a certified automotive engineer
X2
Love my $40 merc arms, never had a problem with them.
My friend has them engineered.
Steers as good as my brothers car with snake high steer, but you can run your tie rod on top of the springs as well.
PS. My merc arms didn’t need hogging out!
I support PETA
People
Eating
Tasty
Animals
:)
People
Eating
Tasty
Animals
:)
Oh, it's not just the merc arms that's the problem, I don't agree with ANY steering that bolts to the caliper bracket. A kit that picked up the kingpin bolts AND the caliper woudl be preferable, as then it's bolted in two planes.
No, I've never seen a caliper bracket break. That doesn't make bolting the steering to it right.
Aerenandmel - you didn't have to elongate the mounting hole on the merc arm to make it bolt to the caliper bracket?
As for runnning two merc arms to lift the tie rod- AFAIK, thay will do really terrible things to the ackerman angle. I am aware of some people (actually, one guy) who supports reverse ackerman for 4WD's, but the reverse ackerman with 2 merc arms will be pretty savage. (i.e the outside wheel will turn much sharper than the inside wheel)
Steve.
No, I've never seen a caliper bracket break. That doesn't make bolting the steering to it right.
Aerenandmel - you didn't have to elongate the mounting hole on the merc arm to make it bolt to the caliper bracket?
As for runnning two merc arms to lift the tie rod- AFAIK, thay will do really terrible things to the ackerman angle. I am aware of some people (actually, one guy) who supports reverse ackerman for 4WD's, but the reverse ackerman with 2 merc arms will be pretty savage. (i.e the outside wheel will turn much sharper than the inside wheel)
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
i believe aerenandmel's car had the arms straightend like the one that was engineered. the ackerman angle will be effected in just the same way as any other HI STEER kit is. but in talking to people with high steer, the ackerman theory does not seem to translate through to the drivabilty.Gwagensteve wrote:
No, I've never seen a caliper bracket break. That doesn't make bolting the steering to it right.
Aerenandmel - you didn't have to elongate the mounting hole on the merc arm to make it bolt to the caliper bracket?
Steve.
its not a can of worms, but if something is strong enough, it's strong enough. but this is why i was not going to post because i know what i think is right (and engineered) is not the same view as others.
jason out..
WANTED: swb vitara rear seat. the 3 seater bench type
for sale: wt diffs, snake hi steer, maruti 4.1 wt centres,
for sale: wt diffs, snake hi steer, maruti 4.1 wt centres,
I don't wish to drag this out, but the effect on ackerman will only apply when both merc arms are used to move the tie rod above the spring.
In this instance ackerman is a direct result of the shape of the arms and IMHO the merc arms are not well suited to moving the whole tie rod above the spring.
Heating and bending a part of this nature is pretty fraught as well.
I am aware that some who have played with ackerman do not believe it has a major effect on handling.
Steve.
In this instance ackerman is a direct result of the shape of the arms and IMHO the merc arms are not well suited to moving the whole tie rod above the spring.
Heating and bending a part of this nature is pretty fraught as well.
I am aware that some who have played with ackerman do not believe it has a major effect on handling.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Who is online
Users browsing this forum: No registered users and 8 guests