Can i some one please help me.
i'm looking for a post about a sierra t/case getting locked in gear and can't find the post.
Mine has locked in gear, i would to know if i can just pull the front housing off and clean up( my shifter bush has fallen apart and i think thats what has jammed it) the selectors while in the car, Put it back together or i have to pull it out and strip it right down.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
need help T case
need help T case
cheer up emo kid
Shifter bush. You can swap it with the transfer in place, you just have to pull out the lever.
http://www.outerlimits4x4.com/phpBB2/ft ... ifter+bush
http://www.outerlimits4x4.com/phpBB2/ft ... ifter+bush
|^^^^^^^^^^^^^^| ||
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
For real, I reckon leave it in hey... But I had to do it out on a trip when the bush fell to pieces on me and i kept getting jammed in neutral.
You pull the boots back over transfer stick, two screw drivers crossed over push and twist and it pops out. then push in your new bush and push it back in push and twist again.
You pull the boots back over transfer stick, two screw drivers crossed over push and twist and it pops out. then push in your new bush and push it back in push and twist again.
..wrench, wheel, wreck repeat..
check out the action @ http://www.darwin4x4.net
check out the action @ http://www.darwin4x4.net
just waiting for the bush to show up.
had no problems with getting the stick out, just can't get it back in gear no matter what i do.I'll try to get it back in gear again when i have the bush.
had the bolt that the gear box shifter pivots on snap in half last week as well. went to supercrap got a pack of bolts to fit the thred and ground the end round to fit. now have a spare in the car and works great
had no problems with getting the stick out, just can't get it back in gear no matter what i do.I'll try to get it back in gear again when i have the bush.
had the bolt that the gear box shifter pivots on snap in half last week as well. went to supercrap got a pack of bolts to fit the thred and ground the end round to fit. now have a spare in the car and works great
cheer up emo kid
When you look down the hole that you have pulled the stick out of you will see two rods with a slot in them, one will be sitting either forwards or back of the other. Stick a Flat head screw driver in there and lever one of them to equal the other then put the stick back in. Other wise you wont be able to use the shifter to get them back in gear.
..wrench, wheel, wreck repeat..
check out the action @ http://www.darwin4x4.net
check out the action @ http://www.darwin4x4.net
Who is online
Users browsing this forum: No registered users and 1 guest