hey all
Just wondering if you could post up a few pics of your rear control arm setups, 4links, A frame set ups etc
also how do the control arms, anti sway bars and panhards work with each other and what you feel is the best setup but keeping it road legal...
thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Rear end help
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Mate, not a simple job of slapping a bit of this and a bit of that together from someone elses pics. You need to see an engineer, or someone VERY MUCH in the know about any suspension mods, as they can seriously affect handling and safety (even on the rear).
The question that you raised about how all the bits work together would indicate that you may not have the require "tech" to be tackling this job.
The question that you raised about how all the bits work together would indicate that you may not have the require "tech" to be tackling this job.
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
http://www.pirate4x4.com/forum/showthre ... calculator
prolly one of the best reads around after you download the program
prolly one of the best reads around after you download the program
turbos are nice but i'd rather be blown
Who is online
Users browsing this forum: No registered users and 103 guests