Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

WHATS THE MOST YOU CAN DO TO A RAV4

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 36
Joined: Wed Apr 02, 2008 5:42 pm
Location: Ipswich

WHATS THE MOST YOU CAN DO TO A RAV4

Post by FoxyRav »

I want to lift my RAV4 and i want to know what else i can do to it.
It is a 96 RAV4 Cruiser with electric sunroof 5 Door if that helps.
Obviously i don't want to do anything Extreme cause i cant but i would like to know im not going to get stuck everywhere. Not that i have yet. :?: :silly:
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Re: WHATS THE MOST YOU CAN DO TO A RAV4

Post by Sic Lux »

FoxyRav wrote:would like to know im not going to get stuck everywhere. Not that i have yet. :?: :silly:
Might pay to stay on the black top then :finger: Honestly could try call around the suspension shops fulcrum pedders or so and see what they have i know fulcrum list them
plenty of parts on the bench
Top
Posts: 1908
Joined: Thu Aug 04, 2005 8:09 pm
Location: central queensland

Post by known 2 »

there are 40mm lift kits available for them, but the main worie with the rav is the low hanging exhaust and mufler.
they go further than u would expect from a soft roader. but be gentle cos they aint built to strong.
kaylee 2004 hdj78 RV. 33 mickey atz's, winchbar, 3i lift, 3i exhoust, spoties, roofracks and ufh. pimped interior .

86 lwb zook wt soa, 33's, locked, bard up, prety lights. monster tacho:/
Top
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

I saw one at the Wandin show that probably represented the most anyone has done to one so far.

Full interioir cage and at least 35"s.
:D
Top
Posts: 1231
Joined: Sun May 15, 2005 1:00 pm
Location: Bayside, Brisbane

Post by Mr DJ »

I'll bet the running gear in it was far from std as well ;)
91' Hilux Surf with the usual mods & a few different ones ....
Coil SAS by www.budscustoms.com.au
Top
Posts: 6221
Joined: Tue May 31, 2005 12:51 pm
Location: Sydney

Post by v840 »

http://www.pirate4x4.com/forum/showthread.php?t=514048
|^^^^^^^^^^^^^^| ||
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
Top
User avatar
RAY185
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Post by RAY185 »

:shock: Would love to see the finished product. And I'm glad he chose the 3 door. Much sexier than the 5 door family wagon. :D
Top
Posts: 3201
Joined: Wed Oct 25, 2006 9:17 am
Location: Brisbane

Post by Lux_89 »

fark me that rav is off tap! will be good to see the finish product
Single cab 106r - BBP Turbo 3rz
*Boondal Backyard Performance*
Top
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

Dougster wrote:I'll bet the running gear in it was far from std as well ;)
I think the only standard bit left was the body :armsup:
Top
Posts: 403
Joined: Sun Jun 18, 2006 3:46 pm
Location: vic

Post by brentz »

Struth wrote:I saw one at the Wandin show that probably represented the most anyone has done to one so far.

Full interioir cage and at least 35"s.
:D
yer i remeber the one ure on about was at vicwinch last yr not competin thought but would be awesome to seee it compete or a video of it
brentz
TUF-60 starting build soon
Top
Posts: 2176
Joined: Sat May 31, 2003 1:30 am
Location: BrisVegas

Contact:
Contact Mad Cruiser

Post by Mad Cruiser »

ARB does a 40mm lift for Rav4's
1998 Toyota Landcruiser 100 series GXL
1976 FJ45 Landcruiser ute
Top
Posts: 231
Joined: Tue Sep 14, 2004 1:11 pm
Location: Melbourne

Post by leehamescort »

Struth wrote:
Dougster wrote:I'll bet the running gear in it was far from std as well ;)
I think the only standard bit left was the body :armsup:
That body is far from standard too!!

Must have had a lot of hours put into those guards!!! let alone the rest of it.

A piece of automotive art that thing!! :D
Bloody IFS bugger who slows down the SAS boys.
www.vickrawlers.com
Top
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

leehamescort wrote:
Struth wrote:
Dougster wrote:I'll bet the running gear in it was far from std as well ;)
I think the only standard bit left was the body :armsup:
That body is far from standard too!!

Must have had a lot of hours put into those guards!!! let alone the rest of it.

A piece of automotive art that thing!! :D
Yes, maybe the only standard bit left was the Rav badges :D
Top
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

Yep Darren Webster`s Rav is sick.
gen 3
patrol case and diffs
36`s
a marriage
the list goes on and never stops :cool:
Top
Posts: 36
Joined: Wed Apr 02, 2008 5:42 pm
Location: Ipswich

Post by FoxyRav »

How much has it cost you so far to do your RAV up like that.. I think its great what you are doing..What do i need to do all that to mine
Top
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Post by dogbreath_48 »

Guts wrote:Darren Webster`s
Thought so - had me pretty confused for a while!
Top
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

dogbreath_48 wrote:
Guts wrote:Darren Webster`s
Thought so - had me pretty confused for a while!
Yeah I got confussed for a bit :lol:
Top
Posts: 79
Joined: Thu Mar 16, 2006 9:53 am
Location: Wodonga

rav 4

Post by Grublux »

The one from Vic Winch

Image
Top
Posts: 36
Joined: Wed Apr 02, 2008 5:42 pm
Location: Ipswich

Re: rav 4

Post by FoxyRav »

The one from Vic Winch

How high do you have your one lifted. I like alot and what size tyres do you have and make,, Mines still standard at the moment
Top
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Re: rav 4

Post by dogbreath_48 »

FoxyRav wrote:The one from Vic Winch

How high do you have your one lifted. I like alot and what size tyres do you have and make,, Mines still standard at the moment
You're looking at approx(i.e. iwild guess) $20k+ to get your rav kitted out with that sort of lift and tyres, but to a lower standard.
Top
Posts: 403
Joined: Sun Jun 18, 2006 3:46 pm
Location: vic

Post by brentz »

i so want to see a video of ths rav4 any1 got one?
or action pics only had a good look over it sitting still
brentz
TUF-60 starting build soon
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 80 guests