Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Twin Typhoon pumps
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Resident Terrorist
so how'd it go?Nelso wrote:There is a BIG difference in time between 35s and 37s on 15x10 inch rims. You wouldn't think they would be that different but the 37s hold a ridiculous amount of air! It used to take the ARB about 15 min per tyre to get them to 20psi so I could drive to the garage to spend another 20 minutes to do the rest.RAY185 wrote:Yeah this is the issue. No doubt its an excellent compressor but its use doesn't warrant the expense.bogged wrote:I must admit, I feel the need to spend $1500+ on a compressor to used few times a yr, at about 1% of its duty cycle..clm434 wrote:Yeah they are expensive but you do get what you pay for. Basically a 12v pump with 240v performance. Still, each to thier own.RAY185 wrote: $1100(USD) for the bottom of the range.
Come to think of it what are two of the new ARB pumps worth?
Nelso, 6 minutes each tyre sounds excessive. I'd hate to spend close to half an hour just inflating my tyres. Mine are only 35s and probably wouldnt take as long though. I'm pissed off I can't run endless air on my new donk, t worked beautifully on my old one, took about 2 to 3 minutes to go from 6 to 40 each tyre. I'd love to get that speed or close to it from a well setup yet relatively inexpensive 12V setup. I already have the tank and switches, etc. Just need a compressor (or 2).
We should test it on someones 35 up at TuffTruck this weekend and post up how it goes next week.
No-one let down their 35 to test it out but we did pump a 33 from 10psi back up to 35psi in 2 minutes. It was on a 10 inch bead-locked rim too.
I would guess if it takes a 37 on 10 inch rims 6 minutes and a 33 on 10inch rims 2 minutes a 35 on an 8 inch rim is going to be less than 4 minutes.
I should have done a sneaky and let someones tyre down so I could test it but to be honest I forgot about doing this once the fridge opened.
Next time I'm out I will try to remember to pump up a 35 as I am curious myself of how long it will take.
I would guess if it takes a 37 on 10 inch rims 6 minutes and a 33 on 10inch rims 2 minutes a 35 on an 8 inch rim is going to be less than 4 minutes.
I should have done a sneaky and let someones tyre down so I could test it but to be honest I forgot about doing this once the fridge opened.
Next time I'm out I will try to remember to pump up a 35 as I am curious myself of how long it will take.
What's the difference between ignorance and apathy? I don't know and I don't care.
I am an insomniac dyslexic agnostic. I often lay awake all night wondering if there really is a Dog.
I am an insomniac dyslexic agnostic. I often lay awake all night wondering if there really is a Dog.
Posts: 242
Joined: Wed Jul 11, 2007 9:38 am
Joined: Wed Jul 11, 2007 9:38 am
Location: stuck in a hole. not offroad, just deception bay
clm434 wrote:Here's a pump that should flog the ass of an endless setup. www.oasisoffroad.com
U.S military approved...can your pump run a 1/2" rattle gun straight from the pump? WITHOUT A TANK????
my home made endless air running at 2000 RPM off my suzukis 1 litre engine can run a supercheap auto handheld style hammer chiesel with no tank and keeps up suprisingly well
OK you want big air - do a little web searching (i would link it but im lazy :-) ) for the american screw compressors they fit to F250 and the like.
There is some awesome footage of these babies running two jack hammers through 3/4 inch hoses, The unit is about the size of a sprintex supercharger and has all the goodies like auto throttle control etc. But you do have to have f series underbonnet space....
There is some awesome footage of these babies running two jack hammers through 3/4 inch hoses, The unit is about the size of a sprintex supercharger and has all the goodies like auto throttle control etc. But you do have to have f series underbonnet space....
I have been dicking around with the idea in making a Oasis type compressor from a york and an old winch/hydraulic/etc motor.
Here are some links:
http://www.layitlow.com/forums/index.ph ... 66302&st=0
As yet I have not found a york at the wreckers but there are plenty of sanden 508's about.
Another option I am thinking if is just using the pump from a 240v compressor - there are plenty of these around that are cheap and come with a tank and fittings. Then just match up a 12V motor with the right power/rpm.
Here's a handy table for the yorks:
Engine RPM CFM Seconds to fill a 2 gal tank 0-100 psi
750 3.2 34
1200 4.4 25
2000 7.3 15
3000 9.1 12
Another interesting pic, looks like the pump is from a 240v setup:
http://www.12-voltair.com/products_12v6cf.asp
Here are some links:
http://www.layitlow.com/forums/index.ph ... 66302&st=0
This is my DIY version of the Oasis XD2000 compressor. I've coupled a York 210R air conditioning compressor to a Prestolite MBD-5007 5HP hydraulic pump motor (24VDC). I run it with 24V worth of marine deep cycle batteries (4 in series-parallel). This fills my 30 gallon tank in an astonishing 3 minutes (0-150).
As yet I have not found a york at the wreckers but there are plenty of sanden 508's about.
Another option I am thinking if is just using the pump from a 240v compressor - there are plenty of these around that are cheap and come with a tank and fittings. Then just match up a 12V motor with the right power/rpm.
Here's a handy table for the yorks:
Engine RPM CFM Seconds to fill a 2 gal tank 0-100 psi
750 3.2 34
1200 4.4 25
2000 7.3 15
3000 9.1 12
Another interesting pic, looks like the pump is from a 240v setup:
http://www.12-voltair.com/products_12v6cf.asp
I put one of these typhoon pumps on my ute connected to an old fire extinguisher... worked well about 3 times then the compressor sh*t itself... going to go with a more reputable brand next time
01 td42 GU patrol ute, with extra bits and pieces.
[quote="Bluefreak"][quote="ofr57"]flex is over rated :finger:[/quote]
You drive an IFS too, huh...???
:D[/quote]
[quote="Bluefreak"][quote="ofr57"]flex is over rated :finger:[/quote]
You drive an IFS too, huh...???
:D[/quote]
Who is online
Users browsing this forum: No registered users and 134 guests